iPad 2ª Generation 2011 A1395 Wifi A1396 GSM Spare Parts

iPad 2ª Generacion 2011 A1395 Wifi A1396 GSM Repuestos Specifications

The iPad 2 is a tablet produced by Apple Inc. The following describe its technical characteristics:

• Model: A1395 (Wi-Fi), A1396 (GSM model)
• Size: 9.50 inches (241.2 mm) x 7.31 inches (185.7 mm) x 0.34 inch (8.8 mm)
• Weight: A1395 - 1.33 pounds (601 g), A1396 - 1.35 pounds (613 g)
• Display: 9.7-inch (diagonal) LED-backlit glossy widescreen Multi-Touch display with IPS technology
• Processor: 1.0 GHz dual-core Apple A5 custom-designed chip
• Memory: 16GB, 32GB, 64GB
• Cameras: Front - VGA resolution; Rear - 720p HD

Instructions for Apple iPad 2 Replacement Parts

Follow these steps for replacing the parts. Make sure the device is turned off before beginning.

Step 1: Removing iPad’s Front Panel

Heat the edges of the iPad 2's screen to loosen the adhesive. Then, use a plastic opening tool to pry open the front panel.

Step 2: Disconnecting the LCD

After opening, remove the four screws holding the LCD. Lift the LCD, but do not remove it completely. Disconnect the ribbon cables carefully.

Step 3: Disconnecting the Front Panel

The front panel has three digitizer cables; disconnect them using the plastic opening tool.

Step 4: Removing and Replacing damaged Parts

Identify the part that needs replacing. Loosen the screws or cables holding it down and replace it with a new part.

Step 5: Assembling the iPad

After replacing the damaged components, reattach the digitizer cables and set the LCD back. Secure them with screws. Apply a new adhesive strip around the screen frame and set the front panel back to its original position.

Ensure you have a clean working space and use the correct tools during the process.