IPad 8ª Generation 2020 A2270 Wifi A2428 A2429 A2430 Wifi,GSM spare parts

Technical Characteristics of IPad 8ª Generacion 2020 A2270 Wifi A2428 A2429 A2430 Wifi,GSM repuestos

The iPad 8th Generation 2020 models (A2270, A2428, A2429, and A2430) all have high-performance and feature-packed specifications, which we'll detail here.

• Processor: A12 Bionic chip with 64-bit architecture and Neural Engine
• Display: 10.2-inch Retina display with 2160x1620 resolution at 264 pixels per inch (ppi)
• Rear Camera: 8-megapixel camera, ƒ/2.4 aperture, Panorama (up to 43 megapixels), HDR for photos
• Front Camera: 1.2-megapixel photos, ƒ/2.4 aperture, Live Photos, Retina Flash, Face detection
• Compatible with Apple Pencil (1st generation) and the Smart Keyboard
• Operating System: Comes with iPadOS, which brings powerful new capabilities and intuitive features
• Connectivity: Wi ‑ Fi (802.11a/b/g/n/ac), dual band (2.4GHz and 5GHz), HT80 with MIMO, Bluetooth 4.2 technology

Instructions to Replace IPad 8ª Generacion 2020 A2270 Wifi A2428 A2429 A2430 Wifi,GSM repuestos

Tablets like the iPad 8th Generation are intricate devices. Replacing parts can be difficult and should be done with great care. Always consider seeking professional help if uncertain.

Tools you'll need:

• Spudger or plastic opening tool
• Precision tweezers
• Phillips head screwdriver
• Heat gun or a hairdryer
• Replacement parts for your iPad

Steps:

• Use your heat gun to warm up the edges of the iPad's screen, this softens the adhesive underneath.
• Insert a spudger or plastic opening tool into the gap you created. Slowly create a bigger gap by sliding the tool around the iPad's edge.
• Lift the screen carefully. There are cables attached to the underside. Do not sever these cables.
• Remove screws securing the metal shield protecting the display and home button cables with your Phillips head screwdriver.
• Use the spudger to disconnect the home button and digitizer cables.
• You can now remove the screen completely.
• Replace the broken part with the new one. Reassembly is a reversal of the removal process. Make sure all cables are properly connected, and screws are tightly fixed.

Remember, these instructions are basic guidelines. Different parts will require different replacement methods.