IPad Air 1º Generation 2013 2014 A1474 Wifi A1475 A1476 Wifi,GSM spare parts

iPad Air 2013-2014 A1474, A1475, A1476 WiFi and GSM repuestos Technical Specifications

Release Date: November 1, 2013
Models: A1474 (Wi-Fi), A1475 (Wi-Fi/Cellular), A1476 (Wi-Fi/Cellular TD-LTE)
Capacity: 16, 32, 64, 128 GB
Model Numbers: A1474, A1475, A1476
Display: 9.7-inch (diagonal) LED-backlit Multi-Touch display with IPS technology

Steps for Replacing iPad Air Repuestos

Step 1: Tools Required

• Spudger
• Phillips Head Screwdriver
• Replacement Parts
• Heat Gun or iOpener

Step 2: Power Off Your Device

Before starting the repair process, ensure your device is completely turned off.

Step 3: Gently Heat the Perimeter of the Screen

This will soften the adhesive for easier removal. Be careful not to overheat the device as this could cause damage to internal components or the LCD screen.

Step 4: Use the Spudger to Lift the Screen

Start in one corner and move around the perimeter, softly prying up as you go. You want to avoid getting the tool too deep or you may damage the internal components.

Step 5: Disconnect Ribbon Cables

Once the screen is up, you will see several ribbon cables that you need to carefully disconnect. This will separate the screen from the rest of the device.

Step 6: Replace the Necessary Components

Depending on what needs replacing (battery, camera, etc.), this is when you would do it. Make sure to keep track of all screws and where they go for your reassembly.

Step 7: Reconnect all Cables and Reassemble the Device

Following the manufacturer's instructions, reassemble your device. Make sure to clean any residues before closing the device up.

Step 8: Test Your Device

Finally, turn on your device and make sure everything is working properly. The process is complete.