iPad Pro 9.7 2016 A1673 Wifi A1674 A1675 Wifi, GSM spare parts

iPad Pro 9.7 2016 A1673 Wifi A1674 A1675 Wifi, GSM Repuestos Technical Specifications

The iPad Pro 9.7 2016 A1673 Wifi A1674 A1675 Wifi, GSM Repuestos is one of Apple's innovative tablet models. Please find the technical characteristics below:

• Device Type: iPad Pro 9.7 2016 A1673 Wifi A1674 A1675 Wifi, GSM Repuestos
• Launch Date: March 2016
• Operating System: iOS, upgradable to iPadOS 15.2
• Screen Size: 9.7 inches
• Resolution: 1536 x 2048 pixels
• Internal Memory: 32GB/128GB/256GB, 2GB RAM
• Camera: 12 MP rear, 5 MP front
• Battery: Non-Removable Li-Ion 7306 mAh (27.5 Wh)

Replacement Instructions for iPad Pro 9.7 2016 A1673 Wifi A1674 A1675 Wifi, GSM Repuestos

Before we start the replacement process, ensure that the device is completely turned off and disconnected from any power source. Remember to use the right tools and follow the steps precisely.

Tools Required:

• Screwdrivers
• Pry tool
• Heat gun

Steps:

1. Use a heat gun to soften the adhesive around the edges of the iPad
2. Use the pry tool to gently lift the screen, starting from the top edge and moving towards the bottom
3. Once the screen is lifted, disconnect the flex cables connecting the screen to the motherboard
4. Remove the screws securing the battery in place and disconnect the battery connector
5. Remove the battery and replace it with the new one
6. Secure the new battery with the screws and reconnect the battery connector
7. Reconnect the screen flex cables and carefully position the screen back in place
8. Finally, apply heat to the edges to ensure the adhesive sticks properly

Take note that these instructions can vary significantly based on the part you're replacing. Always research before starting and, if unsure, consult a professional.