Technical Specifications of Lenovo tab 2 a10-70f a10-70l Repuestos
The Lenovo Tab 2 A10-70F/A10-70L comes with distinctive features that make it stand out from typical tablets. Therefore, it's essential to understand these features for effective repair, replacement, or maintenance.
- Display Size: 10.1 inches, with a resolution of 1920 x 1200...
Technical Specifications of Lenovo tab 2 a10-70f a10-70l Repuestos
The Lenovo Tab 2 A10-70F/A10-70L comes with distinctive features that make it stand out from typical tablets. Therefore, it's essential to understand these features for effective repair, replacement, or maintenance.
- Display Size: 10.1 inches, with a resolution of 1920 x 1200 pixels.
- Processor: MediaTek MT8165. It's a quad-core processor that clocks at 1.7 GHz.
- OS: Android 4.4.4, upgradable to Android 5.0
- Storage: 16GB, expandable up to 64GB through a microSD card slot.
- Camera: 8MP rear and 5MP front camera
- Battery Capacity: 7000mAh
Instructions to Replace Lenovo tab 2 a10-70f a10-70l Repuestos
Due to its complex design, it's important to replace each part of the tablet with great care. Here is the step-by-step approach:
Preparation
Before beginning the repair and replacement process, ensure that your work area is clean. Disconnect any charging cables, power off the device and wait until it is completely cooled down.
Step One: Removing the back cover
- Use a plastic opening tool or a pry tool to separate the back cover from the display panel.
- Once the tool is inserted, gently slide it around the edges until the back panel is apart. Be careful not to damage the internals in the process.
Step Two: Disconnecting the battery
- The battery connector should be the first thing you disconnect. With a plastic tool, gently pry the battery connector up and remove the battery.
Step Three: Replacing the necessary parts
- At this stage, you can carefully replace the part that is damaged. This step largely depends on the component that you are looking to replace.
- If it is a camera, speaker, or any other component, gently lift them from their connectors before carefully inserting the new one.
Step Four: Reassembling the device
- Connect the battery back to its connector.
- Replace the back cover accurately aligning the clips into their appropriate places.
- Power on your device to test for functionality.
Remember, always exercise caution and patience whenever replacing parts in your device. If the damage seems too complex, consult with a professional technician.
Less