Lenovo Tab E8 tb-8304f1 tb-8304f tb 8304 spare parts

    There are 7 products.

    Technical Characteristics of Lenovo Tab E8 tb-8304f1 tb-8304f tb 8304 Repuestos

    The Lenovo Tab E8 tb-8304f1 tb-8304f tb 8304 repuestos offers an array of noteworthy features:

    • Display: Adopting an 8-inch IPS display with 1280x800 pixels resolution which provides impeccable image quality.
    • Processor: Equipped with a MediaTek MT8163B Quad-core proc...

    Technical Characteristics of Lenovo Tab E8 tb-8304f1 tb-8304f tb 8304 Repuestos

    The Lenovo Tab E8 tb-8304f1 tb-8304f tb 8304 repuestos offers an array of noteworthy features:

    • Display: Adopting an 8-inch IPS display with 1280x800 pixels resolution which provides impeccable image quality.
    • Processor: Equipped with a MediaTek MT8163B Quad-core processor, enabling swift and seamless functionality.
    • RAM and Storage: It comes with 1GB of RAM and 16GB of internal storage, expandable up to 128GB via Micro SD card.
    • Battery: The tablet has a 4850 mAh long-lasting battery, allowing longer usage period.
    • Operating System: Runs on the user-friendly Android 7.0.
    • Camera: The device has a 5MP rear camera and 2MP front camera for capturing perfect shots.

    Instructions for Replacing Lenovo Tab E8 tb-8304f1 tb-8304f tb 8304 Repuestos

    Bear in mind that this task requires a firm but careful hand. Proceed only if you're confident in your technical abilities.

    Materials Needed

    • Screwdriver set
    • Plastic opening tools
    • Replacement parts

    Procedure

    Follow these detailed steps for a successful replacement process:

    1. Firstly, turn off your Lenovo Tab and remove the micro SD and SIM card if any.
    2. Using a plastic tool, gently detach the back cover starting from the corners, moving gradually to avoid any damage.
    3. Once the back cover is removed, you will see the internal components. Use the screwdriver to remove the necessary screws securing the parts which need to be replaced.
    4. After removing the screws, gently lift up the part to replace. Be careful not to yank any connected cables.
    5. Place your new part in the exact position where the old one was and connect all the cables properly.
    6. Reassemble the device by replacing the screws and the back cover. Make sure to replace the micro SD and SIM card, if applicable.
    7. Finally, turn on your device to confirm the replacement process was successful.

    Note: In case of any concerns or complications, seek help from a professional. Always remember that these operations may void your warranty.

    Less
    More
    Showing 1 - 7 of 7 items