Lenovo Tab K10 TB-X6C6X spare parts

Technical Characteristics of Lenovo Tab K10 TB-X6C6X Repuestos

The Lenovo Tab K10 TB-X6C6X repuestos comprises of several key technical components that contribute to the effective functioning of the mobile device. Here are the key parts and their respective descriptions.

• Display Screen: A 10.3-inch, 1920x1200 IPS LCD panel.
• Battery: A 7700mAh Lithium-Polymer battery, non-removable.
• System Board: An Octa-core processor with MediaTek Helio P22T system on a chip.
• Memory: 4GB RAM and built-in storage options of 64GB or 128GB, expandable up to 1TB via MicroSD slot.
• Cameras: An 8MP rear camera and 5MP front-facing camera.
• Connectors and Ports: Includes USB-C, 3.5mm audio jack, and a MicroSD slot.

Instructions for Replacing Lenovo Tab K10 TB-X6C6X Repuestos

Please note that this should be carried out by a professional or under supervision of a professional to prevent damage.

Tools Needed

• Small Phillips screwdriver
• Plastic prying tools
• Tweezers

Procedure

Follow the steps below to replace your Lenovo Tab K10 TB-X6C6X parts:

• Switch off the device: Before doing any repairs, turn off the device to reduce the risk of damage.
• Remove the back cover: Pry the case open using a plastic prying tool. Start from a corner and work your way around the device.
• Detach the battery: After accessing the inside, disconnect the battery connector from the motherboard. This reduces risk of short-circuits.
• Dismantle the defective part: Depending on what part needs replacing, carefully remove its screws and detach it from its connectors.
• Replace the defective part: Place the new part, fasten it with the appropriate screws, and connect it to its connectors.
• Re-assemble the device: Reconnect the battery, secure the back cover, and turn on the device to check if the replacement was successful.