Microsoft Surface GO spare parts

Microsoft Surface GO Repuestos Technical Characteristics

The Microsoft Surface GO comes with a myriad of technological features that contribute to its unique selling point. These features include:

• 10-inch PixelSense Display
• 1800 x 1200 (217 PPI) Resolution
• 3:2 Aspect Ratio
• 10 Point Multi-Touch
• Intel Pentium Gold 4415Y Processor
• Intel HD Graphics 615
• RAM options: 4GB or 8GB
• Storage options: 64GB eMMC or 128GB SSD
• Windows Hello Face Recognition

Instructions for Replacing Microsoft Surface GO Repuestos

Materials Required

You will need the following materials:

• Replacement parts for Microsoft Surface GO
• A set of small screwdrivers
• A plastic pry tool
• A heat gun for loosening adhesive (optional)

Replacing the Parts

Follow the instructions below to replace the parts of your Microsoft Surface GO:

• Power off the device and disconnect the charging cable.
• Use a heat gun to loosen the adhesive around the edges of the display (take care not to overheat the device).
• Insert the plastic pry tool in the gap on the edge and slowly lift the display.
• Unscrew the SILVER screws securing the frame and remove it.
• Unscrew the BLACK screws securing the battery, disconnect it from the motherboard and then remove it.
• Replace the failed component with the new one.
• Reassemble the device by following the above steps in reverse order.

Note: This is a general guide. The steps may differ slightly depending on the specific part you are replacing. Always handle your device with care to avoid further damage.