Microsoft Surface Laptop 4 1867 1868 spare parts

Microsoft Surface Laptop 4 1867 1868 Technical Characteristics

The Microsoft Surface Laptop 4 1867 1868 is a powerful and sleek device with striking features. Here are its technical characteristics:

• Screen: 13.5-inch or 15-inch PixelSense Display
• Resolution: 2256 x 1504 (201 PPI) for the 13.5-inch model, 2496 x 1664 (201 PPI) for the 15-inch model
• Processor: Available in Quad-core 11th Gen Intel Core i5-1135G7 Processor or AMD Ryzen 5 4680U Mobile Processor
• Memory: 8GB, 16GB, or 32GB LPDDR4x RAM
• Storage: Removable solid-state drive (SSD) options: 256GB, 512GB, or 1TB
• Battery life: Up to 19 hours
• Ports: 1 x USB-C, 1 x USB-A, 3.5 mm headphone jack, 1 x Surface Connect port
• Operating System: Windows 10 Home
• Wifi: Wi-Fi 6: 802.11ax compatible

Instructions for Replacing Microsoft Surface Laptop 4 1867 1868 Repuestos

Here is a step-by-step guide for replacing components of the Microsoft Surface Laptop 4 1867 1868.

Tools Required

• Heat gun or hairdryer
• Suction cup
• Spudger
• T3 Torx Screwdriver

Replacement Steps

Before starting, make sure you have a clean, flat surface to work on. It's also recommended to back up all your data.

1. Shut down the device and unplug all external power sources and other connected devices.
2. Apply heat to the edges of the screen using a heat gun or hairdryer on a medium setting. This will soften the adhesive holding the screen in place.
3. Apply the suction cup to a corner of the screen, near the edge, and gently pull up to create a gap between the screen and the case.
4. Insert the spudger into the gap to maintain it, and then cut the adhesive carefully all around the screen. Be careful not to damage the underlying components.
5. Once the adhesive is cut, you can slowly lift off the screen.
6. Use the T3 Torx screwdriver to remove screws on the component that needs to be replaced. Note the location of the screws as they need to be put back in the same orientation.
7. Remove the faulty component and replace it with the new one, then put back the screws.
8. Finally, reapply adhesive and press the screen back into place. Ensure it sits flat and tight.

Remember that opening up your device can void the manufacturer's warranty. If unsure, always seek professional assistance.