Microsoft Surface Pro 4 spare parts

Technical Characteristics of Microsoft Surface Pro 4 Repuestos

Microsoft Surface Pro 4 repuestos are high-quality replacement parts for your Surface Pro 4 device. Here are the main specifications of these parts:

• Display: 12.3" PixelSense display with a resolution of 2736 x 1824 pixels.
• Processor: 6th-generation Intel Core m3, i5, or i7 of Selectable variant.
• Memory and Storage: 4GB, 8GB or 16GB RAM options alongside 128GB, 256GB, 512GB or 1TB Solid-state drive (SSD) choices.
• Wireless: 802.11ac Wi-Fi wireless networking; IEEE 802.11a/b/g/n compatible, Bluetooth 4.0 wireless technology.
• Ports: Full-size USB 3.0, microSD card reader, Headset jack, Mini DisplayPort, Cover port, Surface Connect.

Instructions on Replacing Microsoft Surface Pro 4 Repuestos

Tools Required

To replace the parts of your Surface Pro 4, you will need the following tools:

• T5 Torx Screwdriver
• Spudger or Plastic Opening Tools
• Heat Gun or iOpener

Procedure

Please ensure your Surface Pro 4 is turned off and disconnected from any power source before beginning the following steps:

• First, use a heat gun or an iOpener to heat the edges of the display to soften the adhesive.
• Then, use a spudger or a plastic opening tool to pry the display off carefully. Start from the top edge of the tablet and work your way around the sides.
• After separating the display, carefully disconnect the display connector.
• Next, remove the screws holding the internals with a T5 Torx screwdriver.
• Once the screws are removed, lift out the internal components and replace the necessary parts.
• Fix the new repuestos in place and reattach the screws using the T5 Torx screwdriver.
• Reconnect the display connector and reattach the display to the Surface Pro 4 by applying adhesive to the edges.
• Finally, ensure that the display is firmly attached and let the adhesive dry.

Note: Always take extreme precaution while disassembling your device to avoid any damage.