Microsoft Surface Pro 9 spare parts

Technical Characteristics of Microsoft Surface Pro 9 Repuestos

The Microsoft Surface Pro 9 Repuestos is a transformative 2-in-1 device that brings together the best of a laptop and a tablet. Below are some of its technical characteristics

• Screen: 12.3-inch PixelSense Display
• Resolution: 2736 x 1824 pixels
• Processor: 11th Gen Intel Core Processor
• RAM: Up to 16GB
• Storage: Up to 1TB SSD
• Operating System: Windows 10
• Battery Life: Up to 13 hours of local video playback
• Camera: 5.0MP front-facing camera with 1080p full HD video

Instructions on How to Replace Microsoft Surface Pro 9 Repuestos

Before starting the process, make sure you have the necessary repair tools. You will need a suction cup, a pry tool, a Phillip-head screwdriver, and a safe open pry tool.

Step 1: Removing the Screen

• Begin by switching off the device to prevent any electrical damage.
• Use the heat gun to warm the edges of the screen for two minutes, it makes the adhesive softer and easier to remove the screen.
• Apply the suction cup to the screen, near an edge, and lift slowly. Carefully slide the pry tool under the screen and lightly move it along the edges to separate the screen from the device.

Step 2: Disconnecting the Screen

• Remove the screws attaching the connector using a Phillip-head screwdriver.
• Unplug the connector and the ribbon cable attaching the screen to the device.

Step 3: Replacing the Repuestos

• Once the screen is disconnected, you will have access to the repuestos. Remove the faulty parts and carefully replace them with the new parts, making sure all screws are in place.

Step 4: Reconnecting the Screen

• Reconnect the connector and the ribbon cable.
• Fix the screen back on the device and replace the screws. Apply slight pressure on the screen to secure the adhesive.

After following these steps, your Surface Pro 9 should be as good as new!