Microsoft Surface Pro X spare parts

Technical Characteristics of Microsoft Surface Pro X Repuestos

The Microsoft Surface Pro X is a premium device that requires specific parts for repairs, called "repuestos" in Spanish. Here are some technical characteristics of these parts:

• Display: Mainly uses a PixelSense™ Display with features like a 13” touchscreen and 2880 x 1920 resolution.
• Processor: Typically houses a Microsoft SQ1 or SQ2 processor.
• Battery: Equipped with a long-lasting battery with a capacity of up to 5020mAh.
• Cameras: Contains front and rear-facing cameras, with 5.0MP and 10.0MP respectively.
• Memory and Storage: Incorporates memory (RAM) up to 16GB and storage (SSD) up to 512GB.

Instructions to Replace Microsoft Surface Pro X Repuestos

Follow these steps carefully to replace the parts on your Microsoft Surface Pro X:

Prepare Your Tools

Before you begin, make sure you have the following tools:

• A suction cup
• Plastic opening tools
• A Heat gun or hairdryer
• A Torx T3 screwdriver
• ESD-safe tweezers

Step 1: Remove the Screen

Use a heat gun or hairdryer to soften the adhesive holding the screen to the main body. Apply the suction cup to the screen and use the plastic opening tools to gently pry the screen away from the frame.

Step 2: Disconnect the Battery

Use the Torx T3 screwdriver to remove the screws holding the battery connector in place. Then, use the ESD-safe tweezers to disconnect the battery connector from the motherboard.

Step 3: Replace the Faulty Component

After disconnecting the battery, locate and replace the faulty component. For example, if the processor is faulty, use your Torx T3 screwdriver to remove it and replace it with a new one.

Step 4: Reassemble the Device

Reconnect the battery and reattach the screen, ensuring it is securely in place. Then, replace the screws and test the device to make sure it is functioning correctly.