Samsung Galaxy Tab A 8 T380 spare parts

    There are 14 products.

    Technical Characteristics of Samsung Galaxy Tab A 8 T380 Repuestos

    The Samsung Galaxy Tab A 8 T380 Repuestos is equipped with various hardware components that work in tandem to provide premium device performance. The following are some notable specifications:

    • Processor: Qualcomm Snapdragon 425
    • Display: 8.0 inches, 1200 x 800 pixels
    • RAM: 2GB
    • Int...

    Technical Characteristics of Samsung Galaxy Tab A 8 T380 Repuestos

    The Samsung Galaxy Tab A 8 T380 Repuestos is equipped with various hardware components that work in tandem to provide premium device performance. The following are some notable specifications:

    • Processor: Qualcomm Snapdragon 425
    • Display: 8.0 inches, 1200 x 800 pixels
    • RAM: 2GB
    • Internal Storage: 16GB, expandable up to 256GB with a MicroSD card
    • Battery: 5000mAh, non-removable
    • Camera: Rear - 8MP, Front - 5MP

    Replacing Samsung Galaxy Tab A 8 T380 Repuestos

    Before proceeding, ensure you have the necessary tools like a pry tool, small Phillips screwdriver, and a heat gun or hair dryer. Replacing parts should be done carefully to avoid damaging the device.

    Step 1: Power off the device

    Press and hold the power button, then confirm to switch off the device to avoid short circuits during the repair process.

    Step 2: Heat the edges of the device

    Using a heat gun or hairdryer, heat along the edges of the device to loosen the adhesive holding the screen to the device.

    Step 3: Remove the Screen

    Using the pry tool, carefully insert it between the screen and the tablet frame. Slide it around the edges gently to separate the screen. Be careful not to damage the screen while doing this.

    Step 4: Remove the necessary screws

    With the screen removed, use a small Phillips-head screwdriver to remove the screws securing the internal components or boards that require replacement.

    Step 5: Replace the defective component

    After unscrewing, carefully remove the faulty component and replace it with the new one. Ensure to handle the parts delicately as they are often sensitive to pressure.

    Step 6: Reassemble the device

    Once the component is replaced, reassemble the device by screwing back the components, reattach the screen and press the edges firmly to stick the screen back to the frame with the adhesive.

    Please note that improper handling can cause further damage to the device. If unsure, please consult or hire a professional.

    Less
    More
    Showing 1 - 14 of 14 items