Samsung Galaxy Tab A2 T590 T595 spare parts

Samsung Galaxy Tab A2 T590 T595 Repuestos - Technical Characteristics

The Samsung Galaxy Tab A2 T590 T595 tablets come with several key components that are often sourced as replacement parts (repuestos). They include:

• Screen and Digitizer Assembly: This is a 10.5" LCD screen, with 1920x1200 pixel resolution.
• Battery: A 7300mAh Li-Ion battery, which can be replaced if the original battery is faulty or worn out.
• Main Board: The motherboard of the tablet which houses the processor and memory can also be replaced.
• Speakers: The tablet comes with dual speakers that provide stereo audio.
• Rear Camera: An 8.0-megapixel camera can be replaced if broken or defective.
• Front Camera: A 5.0-megapixel camera is used for video calls and selfies.

Instructions for Samsung Galaxy Tab A2 T590 T595 Repuestos Replacement

Battery Replacement

Follow these steps to replace the battery of your Samsung Galaxy Tab A2 T590 T595:

• Power off your device to avoid any electric shock during the process.
• Use a prying tool to carefully remove the back cover of the tablet.
• Locate the battery and disconnect it from the motherboard.
• Remove the old battery and replace it with the new one. Make sure to correctly position it according to the battery's connector.
• Reconnect the battery to the motherboard and place the back cover.

Screen and Digitizer Assembly Replacement

Follow these steps to replace the screen and digitizer of the Samsung Galaxy Tab A2 T590 T595:

• Switch off your tablet to prevent any damage.
• Use a heat gun to warm the edges of the front panel. This loosens the adhesive securing the screen.
• Apply a suction cup to the screen and gently lift the screen.
• Use a prying tool to separate the screen and digitizer assembly from the tablet body.
• Disconnect the screen and digitizer assembly from the motherboard.
• Connect the new screen and digitizer assembly to the motherboard. Make sure the connectors align properly.
• Reapply adhesive and place the new screen and digitizer assembly onto the tablet body.
• Switch your tablet on to verify the functionality of the new screen.