Samsung Galaxy Tab Active Pro 10.1 4G SM-T545N repuestos

Samsung Galaxy Tab Active Pro 10.1 4G SM-T545N Specifications

The Samsung Galaxy Tab Active Pro 10.1 4G SM-T545N comes with an impressive set of technical characteristics.

• Display: 10.1-inch TFT LCD with 1920 x 1200 pixel resolution
• Processor: Qualcomm Snapdragon 670
• Memory: 4GB RAM
• Storage: 64GB, expandable up to 512GB with MicroSD
• Camera: Rear - 13.0 MP, Front - 8.0 MP
• Battery: 7600mAh, User Replaceable
• Connectivity: 4G LTE, Wi-Fi, Bluetooth and USB Type-C
• Operating System: Android 9.0 Pie

Instructions for Replacing Samsung Galaxy Tab Active Pro 10.1 4G SM-T545N Repuestos

Before you undertake the replacement of any component, ensure you have the correct tools and replacement parts. Please follow the steps below:

Screen Replacement

• Step 1: Turn off your tablet and remove all the covers and cards.
• Step 2: Warm the edges of the screen with a heat gun so you can loosen the adhesive.
• Step 3: Carefully use a tool to pry the screen up from the corners.
• Step 4: Slowly lift the screen, but watch for the ribbon cable. Disconnect it.
• Step 5: Place your new screen and connect the ribbon cable. Lay it down and apply adhesive to the edges.

Battery Replacement

• Step 1: Make sure your tablet is completely off.
• Step 2: Remove the back cover of the device, you may need a prying tool.
• Step 3: Locate the battery and disconnect the battery connector from the motherboard.
• Step 4: Remove the old battery, and replace it with the new one.
• Step 5: Reconnect the new battery to the motherboard, and put back the back cover.

Please remember that any attempt to repair your tablet device is at your own risk.