Samsung Galaxy Tab S 8.4 T700 T701 T705 spare parts

Samsung Galaxy Tab S 8.4 T700 T701 T705 Specifications

The Samsung Galaxy Tab S 8.4 T700 T701 T705 carries the following technical specifications:

• Display: Super AMOLED capacitive touchscreen, 16M colors
• Size: 8.4 inches, 204.6 cm2 (~76.5% screen-to-body ratio)
• Resolution: 1600 x 2560 pixels, 16:10 ratio (~359 ppi density)
• OS: Android 4.4.2 (KitKat), upgradable to 6.0 (Marshmallow), TouchWiz UI
• Chipset: Exynos 5420 Octa (28 nm)
• Memory: Having microSDXC (dedicated slot), with 16GB 3GB RAM, 32GB 3GB RAM internal storage

Guide to Replace Samsung Galaxy Tab S 8.4 T700 T701 T705 Parts

Before you start, ensure you have the necessary tools including a screwdriver, pry tool, and a heat gun or hairdryer. Place all parts and screws in a separate container to avoid loss.

Open the Device

Begin by turning off the device. Heat up the edges of the back cover using a heat gun or hairdryer to soften the adhesive. Use the pry tool to gently lift off the back cover.

Disconnect the Battery

Navigate to the battery's connector on the motherboard. Unscrew the protective metal cover and use the pry tool to disconnect the connector. Keep all screws securely in your container.

Remove the Motherboard

Remove all screws holding the motherboard in place. Note that these screws may vary in size. Disconnect all ribbon cables connected to the motherboard. Carefully lift the motherboard from the frame.

Replace Desired Components

Now you have access to replace any desired parts such as speakers, camera module, or charging port. Make sure to connect all cables and screws back to their respective place when finished.

Reassemble the Device

After replacing the necessary part(s), reconnect the battery and align the motherboard back to its position, screwing it back in place. Secure the back cover back using moderate force to activate the adhesive, or add adhesive if needed.

Remember, if you feel uncomfortable doing the repairs yourself, you should seek professional help.