Samsung Galaxy Tab S6 SM-T860 spare parts

Samsung Galaxy Tab S6 SM-T860 Technical Characteristics

The Samsung Galaxy Tab S6 SM-T860 is an advanced tablet device known for its numerous rewarding features and high-quality components. An overview of the technical characteristics includes:

• Display: Super AMOLED capacitive touchscreen, 16M colors
• Size: 10.5 inches
• Resolution: 1600 x 2560 pixels
• Operating System: Android 9.0 (Pie), upgradable to Android 11, One UI 3.1
• Processor: Octa-core (2x2.84 GHz Kryo 485 & 2x2.42 GHz Kryo 485 & 4x1.78 GHz Kryo 485)
• Memory: 128GB 6GB RAM, 256GB 8GB RAM
• Camera: Rear camera - 13 MP, Front camera - 8 MP
• Battery: Non-removable Li-Po 7040 mAh battery

Instructions on How to Replace Samsung Galaxy Tab S6 SM-T860 Repuestos

Changing the parts on your Samsung Galaxy Tab S6 SM-T860 will require various steps based on the part that needs to be replaced. Below is an example of how to replace a common component like the battery.

Instructions to Replace the Battery

• Step 1: Ensure your tablet is turned off.
• Step 2: Start by warming the back cover slightly with a heat gun or hair drier to soften the adhesive
• Step 3: Use pry tools to open the tablet, moving them around the edges carefully so as not to damage any internals
• Step 4: After the back cover is off, locate the battery.
• Step 5: Unscrew and remove the screws holding the battery, then disconnect the battery connector.
• Step 6: Carefully remove the old battery.
• Step 7: Place the new battery in the same location, connect the battery connector and re-screw it in place.
• Step 8: Replace the back cover carefully, applying slight pressure around the edges to engage the adhesive.
• Step 9: Power the device to test the new battery.

Ensure you always follow safety guidelines when working with electronics. It would be helpful to seek an expert's service if these steps seem too technical to attempt self-replacement.