Samsung Galaxy Tab S9 FE X510 X516B spare parts

Samsung Galaxy Tab S9 FE X510 X516B Repuestos Technical Characteristics

The Samsung Galaxy Tab S9 FE X510 X516B Repuestos is a set of high-quality replacement parts to repair or enhance your device's functionality. Here's a look at major components available:

• Display Panel: Super AMOLED Plus, 2560 x 1600 pixels, ~287 ppi density, 120Hz
• Processor: Snapdragon 865+
• Battery: Non-removable Li-Po, 8000 mAh
• Front Camera: 8 MP, f/2.0
• Rear Camera: 13 MP, f/2.0, (wide), 1/3.4"
• Memory: 128GB/256GB internal memory and 6GB/8GB RAM

Instructions on How to Replace Samsung Galaxy Tab S9 FE X510 X516B Repuestos

Before you start, ensure you have the necessary tools: a Phillips head screwdriver, plastic opening tools, tweezers, and a heat gun. Most importantly, only perform these steps if you are comfortable doing so. In case of uncertainty, seek professional help.

Step 1: Power Off the Device

Before starting any repair process, always ensure the device is powered off to prevent any electrical damage.

Step 2: Removing the Back Cover

Apply heat to the edges of the back cover using a heat gun. Use the plastic opening tool to pry open the back cover by inserting it in between the front glass and the back cover. Slowly slide along the edges to detach the back cover. Be cautious to avoid any damage to the internal components.

Step 3: Disconnecting the Battery

Locate and unscrew the screw securing the battery connector with a screwdriver. Then with the help of tweezers, disconnect the battery connector from the logic board.

Step 4: Replacing the Component

After disconnecting the battery, removing or replacing the faulty hardware can be commenced. Proceed to replace each component per the accompanying manufacturer’s instructions.

Step 5: Reassembly

After replacing the necessary components, connect the battery connector back to the logic board and fasten the screw. Align the back cover with the front glass and press evenly around the sides until the back cover snaps back into place.

Power on your device to see if the replacement part is working fine. If there are any issues, you may need to repeat the process or consult a professional.