Sony Xperia Z4 Tablet SGP771 SGP712 spare parts

    There are 9 products.

    Sony Xperia Z4 Tablet SGP771 SGP712 Technical Characteristics

    The Sony Xperia Z4 Tablet SGP771 SGP712 is a sleek and powerful device known for its high-performance specifications. Here, we review its key repuesto or replacement parts

    • Display: 10.1" IPS LCD, 2560 x 1600 pixels
    • Processor: Qualcomm MSM8994 Snapdragon 810 (20 nm)
    • Memory: In...

    Sony Xperia Z4 Tablet SGP771 SGP712 Technical Characteristics

    The Sony Xperia Z4 Tablet SGP771 SGP712 is a sleek and powerful device known for its high-performance specifications. Here, we review its key repuesto or replacement parts

    • Display: 10.1" IPS LCD, 2560 x 1600 pixels
    • Processor: Qualcomm MSM8994 Snapdragon 810 (20 nm)
    • Memory: Internal 32GB, 3GB RAM
    • Battery: Non-removable Li-Po 6000 mAh
    • Camera: 8.1MP rear, 5.1MP front

    Instructions for Replacing Sony Xperia Z4 Tablet SGP771 SGP712 Repuestos

    Tools Needed

    You will need the following tools: a heat gun, a plastic opening tool and tweezers.

    Battery Replacement

    • Step 1: Disconnect the tablet from the power source.

    • Step 2: Heat the edges of the tablet using the heat gun to loosen the adhesive holding the back cover.

    • Step 3: Use the plastic opening tool to pry open the back cover. Be careful not to damage the internals.

    • Step 4: Locate and disconnect the battery connector from the motherboard.

    • Step 5: Remove the battery using the plastic opening tool and tweezers.

    • Step 6: Replace the old battery with a new one and reassemble the tablet by doing steps 1 to 4 in reverse order.

    Screen Replacement

    • Step 1: Disconnect the tablet from the power source and remove the back cover following Step 1 to Step 3 of battery replacement.

    • Step 2: Locate and disconnect the screen connector from the motherboard.

    • Step 3: Heat the front of the tablet gently to loosen the adhesive holding the screen.

    • Step 4: Use the plastic opening tool to gently pry out the screen.

    • Step 5: Remove the old screen and replace it with a new one.

    • Step 6: Reassemble the tablet by doing steps 1 to 4 in reverse order.

    Please remember to take care when replacing repuestos to avoid damaging your device. When in doubt, consult a professional.

    Less
    More
    Showing 1 - 9 of 9 items