Oukitel RT2 spare parts

Oukitel RT2 Repuestos Technical Characteristics

The Oukitel RT2 Smartphone is recognized for its robust features and sleek design. Reliable and complex, it requires repuestos (or spare parts) that are designed exactly to fit and function in sync with its existing components. Here are the key technical characteristics of the Oukitel RT2 Repuestos.

• Screen Replacement: High-quality 6.5-inch IPS, LCD, 720 x 1560 pixels
• Battery Replacement: Li-Po 6000 mAh, non-removable
• Camera Replacement: Dual-lens: 48 MP, f/1.8, (wide), 1/2.0", 0.8µm, PDAF 5 MP, f/2.2, (ultrawide)
• Charging Port: USB Type-C 2.0, USB On-The-Go

Instructions for Replacing Oukitel RT2 Repuestos

Please make sure you are working in a dust-free, organized environment. Always remember that smartphones consist of sensitive electronic components. Precision, patience and organization are key to successful replacement.

Replacing the Screen

• Step 1: Turn off the phone and remove the SIM card tray.
• Step 2: Use a professional heat gun to warm up the adhesive holding the screen.
• Step 3: Carefully pry off the old screen using plastic opening tools, being careful not to damage internal components.

Replacing the Battery

• Step 1: Access the battery compartment by removing the back cover and disconnect the battery from the phone's motherboard.
• Step 2: Lift the battery off from its resting place.
• Step 3: Place the new battery into the device and connect it to the motherboard.

Replacing the Camera

• Step 1: Open the phone and locate where the cameras are connected to the motherboard.
• Step 2: Disconnect the old camera and remove it.
• Step 3: Install the new camera and reconnect it to the motherboard.

Replacing the Charging Port

• Step 1: Remove the back panel of the phone to expose the charging port component.
• Step 2: Use precision tweezers to remove the old charging port.
• Step 3: Install the new charging port and ensure that it is securely in place.

Please remember to be careful while replacing the components because they are fragile and could represent a risk if not handled correctly. After the replacing, test your device to make sure everything works as it should.