Realme Pad RMP2102 RMP2103 spare parts

    There are 6 products.

    Realme Pad RMP2102 RMP2103 Specifications

    The Realme Pad RMP2102 RMP2103 is a dynamic and practical device, equipped with high-tech features and specifications. Its key elements include:

    • Processor: MediaTek Helio G80
    • Display: 10.4 inches, 1200 x 2000 pixels resolution
    • Ram: 3GB/4GB
    • Storage: 32GB/64GB, expandable via microSD card
    • Battery: 7100m...

    Realme Pad RMP2102 RMP2103 Specifications

    The Realme Pad RMP2102 RMP2103 is a dynamic and practical device, equipped with high-tech features and specifications. Its key elements include:

    • Processor: MediaTek Helio G80
    • Display: 10.4 inches, 1200 x 2000 pixels resolution
    • Ram: 3GB/4GB
    • Storage: 32GB/64GB, expandable via microSD card
    • Battery: 7100mAh, with fast charging support
    • Camera: 8MP front and rear lenses

    Instructions for Replacing Realme Pad RMP2102 RMP2103 Repuestos (Spare Parts)

    The following steps should be meticulously followed when replacing parts on the Realme Pad RMP2102 RMP2103.

    Step 1: Safety Preparations

    Before you start, make sure to power off your device and work on a clean, flat surface. Also consider wearing an anti-static wrist strap to protect delicate internal components from electrostatic discharge.

    Step 2: Removing the Back Cover

    Using a precision screwdriver, remove any screws attached to the back cover. Use a plastic opening tool to pry open the cover. Be gentle to prevent cracking the cover or damaging the internal components.

    Step 3: Detaching the Battery Connector

    Locate the battery's connector on the motherboard. Carefully disconnect it by lifting the connector from the socket. Be sure not to pull or tug, to prevent damaging the connector or socket.

    Step 4: Replacing the Damaged Part

    Identify and locate the damaged part you wish to replace. Remove any screws if necessary and carefully lift out the damaged component. Replace it with the new part, making sure it fits correctly and is properly aligned.

    Step 5: Reassembling the Device

    Reconnect the battery connector and carefully replace the back cover, ensuring it snaps into its original place. Reinsert the screws you initially removed for the back cover. Power on your device to confirm that the replaced component is functioning properly.

    These instructions are general guidelines for the replacement of most parts in your Realme Pad. Always consult your device's specific manual or professional assistance if unsure.

    Less
    More
    Showing 1 - 6 of 6 items