Xiaomi Mi Pad 4 Plus spare parts

Xiaomi Mi Pad 4 Plus Specifications

The Xiaomi Mi Pad 4 Plus is an impressive tablet equipped with top-of-the-line features that guarantee exceptional performance. Here are the key specifications:

• Screen Size: 10.1 inches IPS LCD, touchscreen
• Resolution: 1920 x 1200 pixels
• Processor: Qualcomm SDM660 Snapdragon 660 Octa-core
• Battery: Non-removable Li-Po 8620 mAh battery
• Weight: 485g
• Dimensions: 245.6 x 149.1 x 8 mm

How to Replace Xiaomi Mi Pad 4 Plus Parts

Replacing parts in your Xiaomi Mi Pad 4 Plus requires some technical know-how, precision, and patience. Always ensure you have the right tools needed before you begin the replacement process.

Preparation

• Switch off your tablet to prevent any possible short circuits during the repair process.
• Prepare your workspace: make sure it’s clean, well lit, and you have all the necessary tools and replacement parts.

Opening the Device

• Heat the edges: of the device to soften the adhesive holding the screen and the frame. A hairdryer or a heat gun can be used for this.
• Attach suction cups: to the screen. Lift the screen gently to create a gap between the screen and the frame.

Replacing Parts

Keep in mind, the replacement process may vary depending on the part being replaced.

• Disconnect the faulty part: Each part connects to the motherboard via ribbon cables. Disconnect these cables before removing the part.
• Remove the faulty part: Use the appropriate tool depending on the part.
• Replace with the new part: Connect the new part to the motherboard via its Ribbon cables.

Reassembling the Device

• Re-attach the screen: Position the screen on the frame and press it down to fix it in place.
• Test your device: Turn your tablet on and check if the new part is working properly.

Note: If you’re not confident in opening up your Xiaomi Mi Pad 4 Plus, hiring a professional technician is highly recommended.