Xiaomi Pad 6S Pro 12.4 spare parts

Xiaomi Pad 6S Pro 12.4 Repuestos Specifications

The Xiaomi Pad 6S Pro 12.4 Repuestos is a robust tablet device with great features. Below is a detailed list of its technical characteristics:

• Display: 12.4 inches, 2560 x 1600 pixels resolution
• Processor: Qualcomm Snapdragon 870
• RAM: 8GB/12GB
• Storage: 128GB/256GB
• Camera: 13MP Rear, 8MP Front
• Battery: 8600mAh Li-Po
• Operating System: MIUI 12, Android 11

Instructions on Replacing Xiaomi Pad 6S Pro 12.4 Repuestos

Before we begin, always remember to turn off the device and remove the SIM card. The battery should also be drained to less than 25% to prevent any possible accidents.

Replacing the Screen

• Step 1: Begin by heating the edges of the screen to soften the adhesive.
• Step 2: Use a plastic tool to pry open the screen gently without causing damage.
• Step 3: Once the old screen is removed, clean any adhesive residue.
• Step 4: Apply fresh adhesive on the replacement screen and carefully place it on the device.
• Step 5: Apply pressure to ensure the adhesive sticks properly. Allow some time for it to dry before turning on the device.

Replacing the Battery

• Step 1: Open the back cover using the appropriate tool.
• Step 2: Unscrew the protective shield covering the battery connector.
• Step 3: Detach the battery connector and carefully remove the old battery.
• Step 4: Install the new battery and secure the connector.
• Step 5: Replace the protective shield and snap the back cover into place.

Remember, if you feel uncomfortable performing any of these steps, it's advised to consult with a professional.