Xiaomi Redmi Pad SE spare parts

Xiaomi Redmi Pad SE: Technical Characteristics

The Xiaomi Redmi Pad SE is an advanced smartphone device known for its efficient performance and affordability. Here are the technical characteristics of this smartphone:

• Display: 720 x 1600 pixels, 20:9 ratio (~270 ppi density)
• CPU: Octa-core (2x2.0 GHz Cortex-A75 & 6x1.8 GHz Cortex-A55)
• Memory: 64GB 4GB RAM, 128GB 4GB RAM, 256GB 4GB RAM; microSDXC (dedicated slot)
• Cameras: 48 MP, f/1.8, (wide), 1/2.0", 0.8µm, PDAF | 8 MP, f/2.2, (ultrawide)
• Battery: Non-removable Li-Po 5020 mAh battery| Fast charging 18W

Instructions for Replacing the Xiaomi Redmi Pad SE Repuestos

Below you'll find detailed instructions on how to replace the Xiaomi Redmi Pad SE repuestos. Please ensure that you have all necessary tools prior to beginning the procedure.

Tools Needed

• Plastic opening tools
• Small Phillips screwdriver
• Spudger
• Tweezers

Procedure

Follow the steps below to successful replace your Xiaomi Redmi Pad SE repuestos:

1. Power off your device to prevent any electrical damage.
2. Use a plastic opening tool to gently pry the back cover of the phone away from the frame.
3. Remove all the screws securing the mid-frame with a small Phillips screwdriver.
4. Once screws are removed, use a spudger to carefully lift the mid-frame from the phone.
5. Locate the damaged part and delicately disconnect it from the main board using the tweezers.
6. Replace the damaged part with the replacement.
7. Reconnect the new part to the main board.
8. Attach the mid-frame back to the phone using the spudger.
9. Screw in all the screws that were previously removed.
10. Finally, clip the back cover in its place.

Be sure to take extra care during these steps to prevent further damage to the device.