Nintendo New 2DS XL

Nintendo New 2DS XL Technical Specifications

The Nintendo New 2DS XL showcases impressive technical features that provide an incomparable gaming experience.

Hardware Specifications

• Size (when closed): 86mm x 160mm x 20mm
• Weight: Approximately 260 grams
• Display: Upper: 4.88" (diagonal) TFT LCD, 400 x 240 pixel resolution / Lower: 4.18" (diagonal) resistive touch screen, 320 x 240 pixel resolution
• Cameras: Front camera and two external rear cameras
• Processing Power: Dual-Core ARM11 MPCore, Quad-Core VFPv2 Co-Processor
• Memory: 256MB (RAM), 10MB (VRAM)

Software Specifications

• Operating System: Proprietary operating system based on Nintendo DSi system software
• Media: Compatible with 3DS and DS games (excluding 3D feature)

Instructions for Replacing Nintendo New 2DS XL

Replacing the Nintendo New 2DS XL involves several steps and requires careful attention to ensure the process is completed correctly.

Materials Needed

• Replacement Nintendo New 2DS XL Unit
• Screwdrivers: Phillips #00 and Tri-wing #00 Screwdriver

Steps

• Step 1: Before starting, ensure the replacement Nintendo New 2DS XL unit and all tools are readily accessible.
• Step 2: Turn off the malfunctioning unit and unplug all connected accessories.
• Step 3: Remove the stylus and the game card from the malfunctioning unit.
• Step 4: Use the Phillips #00 Screwdriver to remove the screws from the back panel. Store these screws in a safe place.
• Step 5: Lift the back panel carefully to expose the battery. Remove the battery from its slot.
• Step 6: Use the Tri-wing #00 Screwdriver to release the screws securing the motherboard. Retain these screws for later.
• Step 7: Carefully lift the motherboard and disconnect the attached ribbons.
• Step 8: Once the internal components are exposed, carefully transfer the required components like SD card or SIM card (if any) to the replacement unit.
• Step 9: Assemble the replacement unit by reversing the steps above. Make sure all components are securely in place and the unit is fully reassembled before attempting to power it on.

Remember, replacing your console should be considered only when necessary as it can void your warranty if not done properly.