Playstation 4

Technical Characteristics of Playstation 4

The Sony Playstation 4 is a state-of-the-art gaming console with high-performance attributes. Here, we cover its main technical characteristics:

• CPU: Single-chip custom processor, x86-64 AMD "Jaguar", 8 cores
• GPU: 1.84 TFLOPS, AMD Radeon™ based graphics engine
• Memory: GDDR5 8GB
• Storage size: 500GB, 1TB
• Dimensions: Approx. 275×53×305 mm
• Weight: Approx. 2.8 kg
• BD/DVD drive (read only): BD × 6 CAV, DVD × 8 CAV
• Input/Output: Super-Speed USB (USB 3.0) port × 2, AUX port × 1
• Networking: Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T)×1, IEEE 802.11 b/g/n, Bluetooth® 2.1 (EDR)

Instructions to Replace Playstation 4

Replacing a Playstation 4 requires careful attention to the steps. Please follow these instructions:

Preparation

• Unplug all cables from your PS4.
• Gather a T8 or T9 Torx security screwdriver and a Phillips screwdriver.

Cover Removal

• Place the PS4 face down.
• Remove the warranty stickers and the black screw below them using your Torx security screwdriver.
• Slide off the PS4’s hard drive cover.

Hard Drive Replacement

• Unscrew the large screw holding the hard drive in place using your Phillips screwdriver.
• Gently pull the hard drive out.
• Remove the four screws on the sides of the hard drive with your Phillips screwdriver. Be sure to keep the rubber pieces in place.
• Take your new hard drive, attach the 4 screws from the old hard drive while keeping the rubber pieces in place.
• Slide the new hard drive into the PS4, then secure it with the large screw.

Reassembly

• Slide the hard drive cover back on.
• Replace the black screw using your Torx security screwdriver.
• Reconnect all cables.

Remember to handle your PS4 with care during this process. Following these instructions correctly will assure that your replacement is successful and secure.