PSP 1000 and E1004 REPAIR PARTS

PSP 1000 and E1004 Repuestos - Technical Characteristics

The Sony PSP 1000 and E1004 are versatile handheld gaming devices, each with their own unique specs. While the PSP 1000, the first model in the series, set a solid foundation, E1004 introduced a number of improvements. They include innovative features like:

• 4.3 inch, 16:9 widescreen TFT LCD on both models
• A host of built-in features including UMD drive, built-in speakers, headphone jack, and fantastic gaming performance on both models
• PSP E1004 has a few more modern tweaks like reduced weight and improved button layout.

PSP 1000 and E1004 Repuestos - Replacement Instructions

What you need

Before you start the replacement process, make sure you have the right tools and replacement parts or 'Repuestos'. Recommended tools for this task include a precision screwdriver set and a pair of tweezers.

Replacement Steps

• Turn off your PSP and remove any disks and memory cards.
• Remove the battery from the back of the PSP. There’s a small latch you can slide to pop it out easily.
• Using your precision screwdriver, remove the small screws located at the top, bottom, and sides of the PSP.
• Carefully lift off the front cover. Be gentle to avoid damaging any internal components.
• With the cover off, you’ll see the internal components. Locate the part you need to replace.
• Each component is held down by screws or clips. Remove these to free the component. It’s helpful to use tweezers here.
• Fit the new replacement part or 'Repuesto' where the old part was. Replace the screws or clips to secure it.
• Replace the front cover and all the screws you removed earlier.
• Reinsert the battery, any disks, and memory cards you removed at the start. Your PSP should be good to go!

Please note that this is a general PSP 'Repuestos' replacement guide. Different parts may have different replacement procedures, so it's always best to look up additional information if needed.