Back cover or battery cover blue by Oppo Reno 6 5G CPH2251 CSL

Blue Rear Cover or Battery Cover for Oppo Reno 6 5G CPH2251 CSL

Blue rear cover or battery cover for Oppo Reno 6 5G CPH2251 in CSL quality, designed to replace a broken, cracked, scratched or deformed cover. This replacement part restores the rear closure, protects the internal components and recovers the external finish of the device.

The part maintains the specific contour and camera module layout of the Oppo Reno 6 5G. It is prepared for professional installation and must be checked on the chassis before applying the final adhesive.

Specifications

Rear cover or battery cover for Oppo Reno 6 5G.

Compatible with technical model CPH2251.

Blue colour.

CSL quality.

Replacement part intended to restore the rear section of the device.

CSL quality provides precise fitting, good structural rigidity and a uniform finish. Its design respects the perimeter of the device and the openings corresponding to the cameras and flash, facilitating stable assembly onto the chassis.

This part is suitable for devices damaged by impacts, drops, pressure or wear. Correct installation helps protect the interior of the device and improves its external finish without replacing the complete frame.

Before final installation, the colour, contour, camera alignment and CPH2251 technical model must be checked. It must not be confused with covers for the Oppo Reno 6 Pro 5G or other regional variants in the series, as they may have differences in dimensions and camera module layout.

Available for immediate shipping from Spain.

Installation Tips

Completely switch off the device and disconnect the battery.

Use ESD protection during the repair.

Remove the damaged cover by applying controlled heat around the perimeter.

Avoid inserting tools too deeply to prevent damage to the battery or internal flex cables.

Completely remove glass and adhesive residue from the chassis.

Position the new cover and check the contour, cameras and flash before sealing.

Use specific adhesive for rear covers.

Apply uniform pressure for 20 to 30 minutes after installation.

Check the closure and camera operation before delivering the device.

Technical Table