Battery B-U0 5000mAh by Vivo X Note V2170A premium quality

B-U0 5000mAh Battery for Vivo X Note V2170A premium quality

B-U0 battery for Vivo X Note V2170A in premium quality, designed to restore the autonomy, charging stability and power performance of the device. This replacement allows replacing a drained, swollen or capacity degraded battery, maintaining a correct fit in the verified compatible model. It integrates 5000mAh total equivalent capacity, 2500mAh internal format at 7.78V and Li Polymer technology. Designed for professional installation, previous charging test and consumption check before closing the chassis.

Specifications

Batteries: 5000mAh equivalent, 2500mAh at 7.78V, 19.45Wh, Li Polymer

Compatibilities: Vivo X Note V2170A

Part No: B-U0

Premium quality ensures stable power supply, good response in charge and discharge cycles and suitable fit for professional repair. It is a solution indicated for terminals with unexpected shutdowns, reduced autonomy, irregular charging, swelling or battery degraded by use. Its format is prepared to respect the internal space of the Vivo X Note and facilitate assembly when previously compared with the installed part. Designed to reduce repeat repairs, improve daily autonomy and optimize workshop repair times. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling any internal flex.

Use ESD protection throughout the repair.

Check the B-U0 reference before installation.

Perform a charging test before closing the device.

Verify consumption, temperature and power on stability.

Do not force the connector or bend the battery flex.

Calibrate the battery after installation with a complete charge and discharge cycle.

Notice

Before installing, always check the battery fitted in the terminal. Some Vivo models may have regional variants or different internal references depending on the sales area. Always compare the reference printed on the factory installed battery, the technical model of the device, the flex, the connector position and the measurements before removing adhesives or performing the final assembly.

Technical table