Battery BB01 3500 x2 mAh by vivo iQOO Neo 10 5G I2405 iQOO Z10 Turbo Pro 5G V2453A premium quality

The BB01 7000 mAh battery for vivo iQOO Neo 10 5G I2405 and iQOO Z10 Turbo Pro 5G V2453A is a premium quality internal replacement designed to replace the battery when it loses capacity or experiences power supply problems. It uses lithium-ion technology and a configuration of two cells connected in series, with an equivalent typical capacity of 7000 mAh at 3.85 V and an energy rating of 26.95 Wh. It allows repairs for reduced battery life, unexpected shutdowns or charging difficulties by replacing the deteriorated component in specialized technical services.

- Compatible brand:vivo iQOO.

- Compatible models:iQOO Neo 10 5G, Indian version, and iQOO Z10 Turbo Pro 5G, Chinese version.

- Compatible technical models:I2405 and V2453A, respectively.

- Battery reference:BB01.

- Quality:Premium.

- Component type:rechargeable internal battery.

- Technology:lithium-ion (Li-ion).

- Configuration:two cells connected in series.

- Equivalent typical capacity:7000 mAh at 3.85 V.

- Equivalent rated capacity:6800 mAh at 3.85 V.

- Typical pack capacity:3500 mAh at 7.7 V.

- Rated pack capacity:3400 mAh at 7.7 V.

- Nominal pack voltage:7.7 V.

- Typical energy:26.95 Wh.

- Rated energy:26.18 Wh.

- Connection system:internal connection to the device's power supply circuit.

- Installation:internal mounting in the phone's battery compartment.

The premium quality BB01 battery provides a specific solution for renewing the energy storage system of the vivo iQOO Neo 10 5G and iQOO Z10 Turbo Pro 5G in compatible variants. Its dual-cell series configuration provides a nominal voltage of 7.7 V, with an equivalent capacity of 7000 mAh at 3.85 V. This electrical architecture corresponds to the battery system used in the specified models. The equivalent rated capacity of 6800 mAh and typical energy of 26.95 Wh allow identification of its main technical parameters. Replacing the battery helps restore battery life lost due to wear while retaining the other functional components of the phone. It is a suitable alternative for specialized workshops carrying out power supply system repairs.

- Completely turn off the device and use antistatic protection during the repair.

- Carefully remove the rear cover using suitable disassembly tools.

- Disconnect the battery from the motherboard before continuing with removal.

- Remove the installed battery assembly using the corresponding removal points, avoiding deformation of the cells or damage to nearby components.

- Clean the battery compartment and remove previous adhesive residue.

- Apply suitable new fixing adhesives and correctly position the BB01 battery.

- Align the connector and establish the connection without forcing the flex cable or contacts.

- Check power-on, battery recognition and charging operation before final closure.

- Check the progression of the battery percentage during the first charging and usage cycles.

- Renew the rear cover adhesive and close the device by applying even pressure to achieve a proper fit.