Battery BLP759 4510mAh by Oneplus 8 Pro IN2020 1031100013 Service Pack

 The BLP759 4510 mAh battery for OnePlus 8 Pro IN2020, IN2021, IN2023 and IN2025 is a genuine Service Pack replacement identified by part number 1031100013. Designed to replace the internal battery in these models, it helps restore battery life when the installed battery shows wear, rapid discharge, unexpected shutdowns or difficulty holding a charge. It uses lithium-ion polymer technology, with a nominal voltage of 3.87 V. It is particularly suitable for professional repair services requiring components with identifiable origins and verified specifications.

- Brand:OnePlus.

- Battery model:BLP759.

- Manufacturer part number (Part No):1031100013.

- Typical capacity:4510 mAh.

- Rated capacity:4410 mAh.

- Nominal voltage:3.87 V.

- Typical energy:17.45 Wh.

- Technology:Lithium-ion polymer (Li-Polymer).

- Component type:Rechargeable internal battery.

- Compatible models:OnePlus 8 Pro IN2020, IN2021, IN2023 and IN2025.

- Quality:Service Pack.

 The BLP759 Service Pack battery allows the replacement of a deteriorated OnePlus 8 Pro battery using a spare part with electrical specifications corresponding to the factory component. Its typical capacity of 4510 mAh and nominal voltage of 3.87 V provide a precise technical reference for carrying out the repair. Part number 1031100013 makes it easier to verify the replacement before installation, reducing the risk of selecting an incorrect battery. It is particularly useful for repairs intended to address progressive battery life reduction, accelerated discharge and faults associated with battery ageing. Furthermore, its compatibility with regional variants IN2020, IN2021, IN2023 and IN2025 simplifies the management of repairs involving devices from different markets.

- Switch off the device completely before starting and use electrostatic discharge (ESD) protection.

- Disconnect the installed battery before removing it, avoiding punctures, excessive bending or damage to its casing.

- Check that the BLP759 reference and connector match those of the removed battery.

- Position the battery in its housing and carefully connect the flex cable without applying excessive pressure to the connector.

- Remove any remaining old adhesive and use suitable fixing adhesive to secure the new battery.

- Check battery recognition, charge percentage and charging operation before closing the device. Perform a calibration cycle if necessary.

- Replace the rear cover sealing adhesive and verify that it is correctly secured. Dispose of the removed battery through an authorised recycling system.