Battery BLP783 2000 mAh by OPPO Ace2 Reno Ace2 PDHM00 Premium quality

BLP783 2000mAh Battery for OPPO Ace2 Reno Ace2 PDHM00 Premium Quality

BLP783 battery for OPPO Ace2, also marketed as OPPO Reno Ace2, with technical model PDHM00, in Premium quality. This professional replacement part is designed to recover the autonomy, charging stability and power operation of the device. It uses an internal dual-cell configuration with 2000mAh at 7.74V and an energy rating of 15.48Wh, equivalent to a combined capacity of 4000mAh at 3.87V. It is suitable for replacing deteriorated, swollen batteries or batteries with rapid discharge or unexpected shutdowns.

Specifications

Internal rechargeable dual-cell battery.

Capacity of 2000mAh at 7.74V.

Equivalent combined capacity of 4000mAh at 3.87V.

Energy rating of 15.48Wh.

BLP783 internal reference.

Compatible with OPPO Ace2 PDHM00.

Compatible with the OPPO Reno Ace2 PDHM00 commercial designation.

Lithium-ion technology.

Prepared to work with the power and charging system of the device when the charger, cable, connector and internal circuit are in good condition.

Premium quality provides stable current delivery and uniform behaviour during charging and discharging cycles. It helps reduce issues such as rapid percentage drops, restarts, shutdowns under load and insufficient autonomy caused by wear of the installed battery. Its dual-cell configuration is adapted to the power system of the OPPO Ace2 and facilitates a firm connection to the mainboard. It is intended for professional repairs requiring installation precision, electrical stability and reduced repeat failures.

Available for immediate shipping from Spain.

Installation Advice

Turn off the device completely before starting the repair.

Disconnect the installed battery before handling other internal components.

Use suitable tools and protection against electrostatic discharge.

Do not bend, puncture, press or apply direct heat to the battery.

Check the BLP783 reference, voltage, flex cable shape and connector position.

Respect the dual-cell configuration and do not replace the battery with a reference using a different voltage.

Clean the adhesive residue and install suitable new fixing adhesive.

Perform a power-on and charging test before final closure.

Complete a charging cycle and check the stability of the percentage and temperature.

Notice

Before installation, always check the battery fitted in the handset. Some OPPO devices may have regional variants or different internal references depending on the market in which they were sold. Always compare the BLP783 reference printed on the removed battery, the PDHM00 technical model, the flex cable shape, the connector position, the voltage and the physical dimensions before installation.

The 2000mAh capacity corresponds to the 7.74V electrical configuration used by the dual-cell battery. Its equivalent combined capacity is 4000mAh at 3.87V.

Technical Table