Battery BLP785 4010mAh by Oneplus Nord AC2001 AC2003 1031100030 Service Pack

 The BLP785 4010 mAh battery for OnePlus Nord 5G AC2001 and AC2003 is a Service Pack replacement identified by part number 1031100030. This component has a rated capacity of 4010 mAh and a typical capacity of 4115 mAh, with a voltage of 3.87 V. It is designed to replace the internal battery when it shows wear, reduced battery life, rapid discharge or unexpected shutdowns. Its lithium-ion polymer technology helps restore power system operation when the fault originates from the battery. It is a suitable solution for professional repairs requiring correctly identified components.

- Brand:OnePlus.

- Battery model:BLP785.

- Manufacturer part number (Part No):1031100030.

- Rated capacity:4010 mAh.

- Typical capacity:4115 mAh.

- Nominal voltage:3.87 V.

- Rated energy:15.51 Wh.

- Typical energy:15.92 Wh.

- Technology:Lithium-ion polymer (Li-ion Polymer).

- Component type:Rechargeable internal battery.

- Compatible models:OnePlus Nord 5G AC2001 and AC2003.

- Quality:Service Pack.

 The BLP785 Service Pack battery allows replacement in accordance with the electrical specifications of the OnePlus Nord 5G, maintaining the capacity and voltage intended for its power system. Its typical capacity of 4115 mAh provides an appropriate performance reference for restoring battery life lost through battery ageing. Identification through part number 1031100030 facilitates replacement selection and verification before installation, reducing repair errors. Its compatibility with the AC2001 and AC2003 variants allows technicians to work with devices from different markets using the same battery model. It is particularly useful for repair services seeking reliability, precise identification and a long-lasting repair using Service Pack components.

- Switch off the device completely before starting and use electrostatic discharge (ESD) protection.

- Reduce the installed battery charge below 25% before disassembly to minimise risks during handling.

- Disconnect the battery before removing it, avoiding punctures, deformation or damage to its casing.

- Check that the BLP785 reference and connector match those of the removed battery.

- Position the new battery in its housing and carefully connect the flex cable without forcing the contacts.

- Remove any remaining old adhesive and use suitable fixing adhesive to secure the battery.

- Check device startup, battery recognition, charge percentage and charging system operation before closing the device.

- Perform a calibration cycle when necessary to stabilise the battery percentage reading.

- Replace the rear cover sealing adhesive and verify that it is correctly secured. Take the removed battery to an authorised recycling facility.