Battery BLP787 2000mAh x2 by Oppo Reno 4 Pro 5G CHP2089 4904496 Service Pack

 The BLP787 battery for OPPO Reno4 Pro 5G CPH2089, also compatible with Reno4 Pro 4G CPH2109 and the 5G variants PDNM00 and PDNT00, is a Service Pack replacement part identified by reference 4904496. It incorporates two 2000 mAh cells connected in series, equivalent to a commercially rated capacity of 4000 mAh. It is designed to replace deteriorated batteries experiencing reduced autonomy, unexpected shutdowns or charging problems associated with wear. Its 7.74 V and 15.48 Wh configuration allows professional repair operations while maintaining the electrical characteristics of these devices.

 - Brand:OPPO.

 - Compatible models:OPPO Reno4 Pro 5G and OPPO Reno4 Pro 4G.

 - Technical models:CPH2089, PDNM00 and PDNT00 (5G); CPH2109 (4G).

 - Battery reference:BLP787.

 - Part Number:4904496.

 - Typical capacity:2000 mAh x2, equivalent to 4000 mAh.

 - Minimum capacity:1955 mAh x2.

 - Configuration:Two cells connected in series.

 - Nominal voltage:7.74 V.

 - Typical energy:15.48 Wh.

 - Technology:Lithium-ion (Li-ion).

 - Device charging system:SuperVOOC 2.0.

 - Quality:Service Pack.

 The BLP787 Service Pack battery allows replacement of the battery in compatible OPPO Reno4 Pro models while maintaining the dual-cell configuration designed for their power supply system. Its equivalent capacity of 4000 mAh and typical energy of 15.48 Wh are suited to the electrical characteristics of these devices. When the installed battery shows signs of wear, replacement can help restore autonomy and stability during everyday use. The BLP787 identification and reference 4904496 simplify selection of the appropriate replacement part, preventing confusion with batteries intended for other Reno4 family models. Its verified compatibility with 4G and 5G versions is particularly useful for repair professionals requiring accurate identification, connector compatibility and reliability during repair operations.

 - Completely power off the device before starting the repair and use electrostatic discharge (ESD) protection.

 - Disconnect the battery before handling the phone's other internal components.

 - Carefully remove the deteriorated battery, avoiding punctures, deformation or excessive temperatures during extraction.

 - Check the BLP787 reference and correctly align the connectors without forcing the flexible cables.

 - Verify power-on, battery recognition and charging system operation before closing the device.

 - Perform a full charge after installation and check that the battery percentage changes correctly, without interruptions or abnormal heating.

 - Remove any remaining adhesive, use suitable replacement adhesive and check the rear cover sealing.