Battery BLP813 by OnePlus Nord N100 BE2011 BE2012 BE2013 BE2015 premium quality

BLP813 Battery for OnePlus Nord N100 BE2011 BE2012 BE2013 BE2015 premium quality

BLP813 battery with 5000 mAh for OnePlus Nord N100 BE2011 BE2012 BE2013 BE2015 in premium quality, designed to recover the autonomy, charging stability and power operation of the device. OnePlus brand and technical models BE2011, BE2012, BE2013 and BE2015 visible for precise identification before installation. This spare part allows replacing degraded batteries, with unexpected shutdowns, low duration, swelling or unstable charging cycles. Includes BLP813 reference and verified compatibilities for OnePlus Nord N100. Designed for professional installation and charging test before closing the chassis.

Premium quality guarantees stable performance, correct fit and good response during charging and discharging cycles. Its 5000 mAh capacity allows recovering the terminal usage duration and maintaining adequate power delivery for professional repairs. It is a recommended solution to change OnePlus Nord N100 battery, replace BLP813 battery or repair devices that show reduced autonomy, restarts, shutdowns when power is required or irregular charging. It is recommended to check the reference printed on the removed battery, inspect the flex, verify the connector position and perform a first calibration after installation. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling the terminal.

Use ESD protection throughout the process.

Check the BLP813 reference on the removed battery.

Perform a charging test before closing the chassis.

Do not force the flex or connectors during assembly.

Replace adhesives and clean internal residues.

Perform an initial calibration with controlled charging and discharging.

Notice

Before installation, always check the battery installed in the terminal. Some OnePlus models may have regional variants or different internal references depending on the sales area. Always compare the reference printed on the original battery, the technical model of the device, the flex and the connector position before removing adhesives or closing the device.

Technical table