Battery BLP831 2200 x2 mAh by Oppo Find X3 Pro CPH2173 4906606 Service Pack

The BLP831 Service Pack battery, part number 4906606, is designed for the Oppo Find X3 Pro CPH2173, PEEM00 and OPG03, as well as the Oppo Find X3 PEDM00. It features two lithium-ion cells connected in series, with a minimum capacity of 2200 mAh at 7.74 V and a typical capacity of 2250 mAh, equivalent to 4500 mAh at 3.87 V. This replacement component allows a deteriorated battery to be replaced when the phone experiences reduced battery life, unexpected shutdowns or difficulty maintaining a charge. It is a specific power supply solution for professional repairs of these devices.

- Brand:Oppo.

- Battery reference:BLP831.

- Part number:4906606.

- Quality:Service Pack.

- Component type:Rechargeable internal battery.

- Technology:Lithium-ion (Li-ion).

- Configuration:Two cells connected in series.

- Minimum capacity:2200 mAh at 7.74 V, equivalent to 4400 mAh at 3.87 V.

- Typical capacity:2250 mAh at 7.74 V, equivalent to 4500 mAh at 3.87 V.

- Nominal voltage:7.74 V.

- Minimum energy:17.02 Wh.

- Typical energy:17.41 Wh.

- Oppo Find X3 Pro 5G:CPH2173, PEEM00 and OPG03.

- Oppo Find X3 5G:PEDM00.

The BLP831 Service Pack battery allows a specific replacement in compatible Oppo Find X3 and Find X3 Pro models, maintaining the dual-cell electrical configuration used by these devices. Its nominal voltage of 7.74 V and equivalent typical capacity of 4500 mAh correspond to the characteristics intended for this family of smartphones.

Part number 4906606 facilitates spare part identification in technical catalogues and professional repair management. Its integrated design allows the power supply module to be replaced without modifying the internal layout of the phone. It is particularly useful for repairs involving battery deterioration, reduced battery life or shutdowns caused by power supply problems, allowing operation to be restored by replacing the deteriorated component.

- Completely power off the device, open the back cover using suitable tools and use electrostatic discharge (ESD) protection.

- Disconnect the existing battery before working on the internal components of the device.

- Carefully remove the previous battery and clean any adhesive residue remaining in its housing.

- Position the BLP831 battery in its corresponding location, using suitable adhesive for secure attachment.

- Align the connection flex cable and connect it without applying excessive pressure or forcing the contacts.

- Check device power-on, battery recognition and charging system operation before final closure.

- Replace the back cover adhesive and check its correct attachment and sealing.

- After installation, perform a full charge and check how the battery percentage changes during normal operation.