Battery BLP839 4310mAh by Oppo A94 5G CPH2211 F19 Pro Plus 5G Reno 6Z Reno 5Z 4906422 Service Pack

 The OPPO BLP839 battery for A94 5G CPH2211, F19 Pro+ 5G CPH2213, Reno6 Z 5G CPH2237, Reno5 Z 5G CPH2211 and A95 5G PELM00 is an original Service Pack replacement identified by part number 4906422. It features a typical capacity of 4310 mAh, a rated capacity of 4220 mAh and a nominal voltage of 3.87 V. It allows the replacement of deteriorated batteries experiencing reduced battery life, rapid discharge or unexpected shutdowns. It is intended for professional repairs that require maintaining the electrical characteristics, connections and format of the factory-installed component.

 - Brand:OPPO.

 - Battery model:BLP839.

 - Part number (Part No):4906422.

 - Typical capacity:4310 mAh.

 - Rated capacity:4220 mAh.

 - Nominal voltage:3.87 V.

 - Typical energy:16.67 Wh.

 - Rated energy:16.33 Wh.

 - Technology:rechargeable lithium-ion battery (Li-ion).

 - Component type:internal battery with integrated flexible connection.

 - OPPO A94 5G:CPH2211, European version.

 - OPPO F19 Pro+ 5G:CPH2213, India version.

 - OPPO Reno6 Z 5G:CPH2237, international version.

 - OPPO Reno5 Z 5G:CPH2211, international version.

 - OPPO A95 5G:PELM00, China version.

 - Quality:original OPPO Service Pack.

 The OPPO BLP839 Service Pack battery helps restore device battery life when the previous battery has lost capacity due to wear and accumulated charging cycles. Its typical capacity of 4310 mAh and nominal voltage of 3.87 V maintain the energy specifications designed for compatible models.

 As an original Service Pack replacement, it retains the format, connections and electrical characteristics corresponding to the factory-installed component, facilitating its integration into the phone's internal compartment.

 Its compatibility with different A, F and Reno series models allows the same part number to be used across different professional repairs. The BLP839 identification and part number 4906422 simplify replacement selection, inventory organization and component management in specialized repair services.

 - Completely switch off the device and disconnect the battery before handling other internal components, using electrostatic discharge (ESD) protection.

 - Carefully remove the rear cover and extract the previous battery using appropriate tools, cleaning adhesive residue from the battery compartment.

 - Position the BLP839 battery correctly, aligning its connector without forcing the contacts or excessively bending the flex cable.

 - Use suitable fixing adhesive and check that the battery is correctly seated in its compartment.

 - Check device power-on, battery recognition and charging operation before final closure.

 - After installation, perform a normal charging cycle and verify the battery percentage progression to check its reading and calibration.

 - Close the rear cover using appropriate adhesive, checking its alignment and the correct sealing of the device.