Battery BLP855 4500mAh by Oppo Reno 8 CPH2359 Oppo Find X5 Lite CPH2371 Oppo Reno 7 5G 4200006 Service Pack

 The OPPO BLP855 battery for Reno8 5G CPH2359, Find X5 Lite CPH2371 and Reno7 5G CPH2371 is an original Service Pack replacement identified by part number 4200006. It is also compatible with the Reno6 Pro 5G CPH2249 and PEPM00. It features two 2250 mAh cells connected in series, with an equivalent capacity of 4500 mAh and a nominal voltage of 7.74 V. It allows the replacement of deteriorated batteries experiencing reduced battery life, rapid discharge or unexpected shutdowns. It is intended for professional repairs that require maintaining the electrical characteristics, connections and format of the factory-installed component.

 - Brand:OPPO.

 - Battery model:BLP855.

 - Part number (Part No):4200006.

 - Typical capacity:2250 mAh per cell, equivalent to 4500 mAh.

 - Rated capacity:2200 mAh per cell, equivalent to 4400 mAh.

 - Nominal voltage:7.74 V.

 - Typical energy:17.41 Wh.

 - Rated energy:17.02 Wh.

 - Technology:rechargeable lithium-ion polymer battery (Li-ion Polymer).

 - Configuration:2S1P dual-cell system, with two cells connected in series.

 - Component type:internal battery with integrated flexible connection.

 - OPPO Reno8 5G:CPH2359, international version.

 - OPPO Find X5 Lite 5G:CPH2371, European version.

 - OPPO Reno7 5G:CPH2371, international version.

 - OPPO Reno6 Pro 5G:CPH2249 and PEPM00, MediaTek processor versions.

 - Quality:original OPPO Service Pack.

 The OPPO BLP855 Service Pack battery helps restore device battery life when the previous battery has lost capacity due to wear and accumulated charging cycles. Its dual-cell configuration, consisting of two 2250 mAh units connected in series, maintains the energy characteristics designed for compatible models.

 As an original Service Pack replacement, it retains the format, connections and electrical specifications corresponding to the factory-installed component, facilitating its integration into the phone's internal compartment.

 Its compatibility with different Reno and Find series devices allows the same part number to be used across different professional repairs. The BLP855 identification and part number 4200006 simplify component selection, inventory organization and spare parts management in specialized repair services.

 - Completely switch off the device and disconnect the battery before handling other internal components, using electrostatic discharge (ESD) protection.

 - Carefully remove the rear cover and extract the previous battery using appropriate tools, cleaning adhesive residue from the battery compartment.

 - Position the BLP855 battery correctly, respecting the position of the dual-cell assembly and aligning its connector without forcing the contacts or excessively bending the flex cable.

 - Use suitable fixing adhesive and check that both cells are correctly seated in their compartment.

 - Check device power-on, battery recognition and charging operation before final closure.

 - After installation, perform a normal charging cycle and verify the battery percentage progression to check its reading and calibration.

 - Close the rear cover using appropriate adhesive, checking its alignment and the correct sealing of the device.