Battery BLP877 5000mAh by Realme 8i C30 C30s C31 C33 C35 Narzo 50A Prime Narzo 50i Prime Note 50 premium quality

Battery BLP877 5000mAh for Realme 8i C30 C30s C31 C33 C35 Narzo 50A Prime Narzo 50i Prime Note 50 premium quality

Internal BLP877 battery for Realme 8i, Realme C30, Realme C30s, Realme C31, Realme C33, Realme C35, Realme Narzo 50A Prime, Realme Narzo 50i Prime and Realme Note 50 in premium quality designed to recover the autonomy and energy stability of the device. This 5000mAh spare part allows degraded, swollen batteries or batteries with unstable charging cycles to be replaced, maintaining proper integration with the compatible models. Designed for professional installation, with reference checking, charging test and previous verification before closing the chassis.

Specifications

Internal lithium polymer battery with 5000mAh capacity.

Technical reference BLP877.

Compatible with Realme 8i, Realme C30, Realme C30s, Realme C31, Realme C33, Realme C33 2023, Realme C35, Realme Narzo 50A Prime, Realme Narzo 50i Prime and Realme Note 50.

Compatible technical models RMX3151, RMX3581, RMX3690, RMX3501, RMX3624, RMX3627, RMX3511, RMX3516, RMX3506 and RMX3834.

Designed to recover autonomy, charging stability and energy performance.

Premium quality spare part suitable for professional installation.

Premium quality guarantees stable response during charging and discharging cycles, good contact with the motherboard and reliable operation after installation. This battery allows common faults such as fast discharge, unexpected shutdowns, loss of autonomy, irregular charging or unstable performance caused by a deteriorated battery to be corrected. Its construction is aimed at offering correct fit, firm connection and adequate performance for daily use. It is recommended to check the reference printed on the original battery, perform a charging test and verify standby consumption before final assembly. Available for immediate shipping from Spain.

Installation tips

Disconnect the old battery before handling any internal connector.

Use ESD protection throughout the repair.

Remove old adhesives and clean the support area.

Do not bend or puncture the battery during removal or installation.

Check the reference printed on the original battery before installing.

Perform a charging test before closing the device.

Calibrate the battery with a full charge after installation.

Notice

Before installing, always check the battery fitted in the device. Some Realme models may have regional variants or different internal references depending on the sales area. Always compare the reference printed on the original battery, the technical model of the device and the connection flex before final assembly.

Technical table