Battery BLP891 2340x2 mAh by Oppo Find X5 CPH2307 4200002 Service Pack

The BLP891 battery for Oppo Find X5 5G CPH2307 and PFFM10, with part number 4200002 and Service Pack quality, is an internal dual-cell replacement designed to replace the device's battery when it experiences reduced battery life or power supply problems. It features two cells rated at 2340 mAh, with a combined voltage of 7.74 V and an equivalent typical capacity of 4800 mAh at 3.87 V. Its lithium-polymer configuration allows the device's power supply to be restored by replacing the deteriorated component, providing a specific solution for professional repairs.

- Brand:Oppo.

- Battery reference:BLP891.

- Part number:4200002.

- Quality:Service Pack.

- Component type:Rechargeable internal dual-cell battery.

- Technology:Lithium-ion Polymer (Li-ion Polymer).

- Configuration:Two cells connected in series.

- Rated capacity:2340 mAh at 7.74 V, equivalent to 4680 mAh at 3.87 V.

- Typical capacity:2400 mAh at 7.74 V, equivalent to 4800 mAh at 3.87 V.

- Nominal voltage:7.74 V.

- Charging voltage limit:8.90 V.

- Rated energy:18.11 Wh.

- Typical energy:18.57 Wh.

- Compatible model:Oppo Find X5 5G.

- Technical models:CPH2307 and PFFM10.

- Versions:International and Chinese.

The BLP891 Service Pack battery allows the power supply module of the Oppo Find X5 5G to be replaced while maintaining the dual-cell electrical configuration corresponding to this model. Its equivalent typical capacity of 4800 mAh and nominal voltage of 7.74 V provide a solution for devices affected by battery deterioration, reduced battery life or shutdowns related to power supply problems.

Part number 4200002 facilitates component identification and management in professional spare parts catalogues. Its configuration of two cells connected in series maintains the power supply characteristics intended for the device. Compatibility with the CPH2307 and PFFM10 variants simplifies component selection and allows a specific replacement without modifying the device's internal layout.

- Completely power off the device and use electrostatic discharge (ESD) protection during the repair.

- Disconnect the existing battery before working on the internal components of the device.

- Carefully remove the previous battery and clean any adhesive residue remaining in its housing.

- Position the new BLP891 battery in its corresponding location, using suitable adhesive for secure attachment.

- Align the power flex cable and connect it without forcing the contacts or applying excessive pressure to the connector.

- Check device startup, battery recognition and charging operation before final closure.

- Replace the back cover adhesive and check its correct attachment and sealing.

- After installation, perform a full charge and check how the battery percentage changes during normal operation.