Battery BLP901 2250x2 mAh by Oneplus 8T KB2000 KB2001 KB2003 KB2005 1031100032 Service Pack

 The BLP801 2250x2 mAh battery for OnePlus 8T KB2000, KB2001, KB2003, KB2005 and KB2007, also compatible with OnePlus 9R LE2100 and LE2101, is a Service Pack replacement identified by part number 1031100032. Its dual-cell configuration provides a typical equivalent capacity of 4500 mAh and is designed to replace internal batteries experiencing reduced battery life, unexpected shutdowns or charging difficulties. This replacement helps restore the power system's operation when the fault originates from the battery and is particularly suitable for professional repair services requiring correctly identified components.

- Brand:OnePlus.

- Battery model:BLP801.

- Manufacturer part number (Part No):1031100032.

- Typical equivalent capacity:4500 mAh (2250 mAh x 2).

- Rated equivalent capacity:4400 mAh (2200 mAh x 2).

- Nominal pack voltage:7.74 V.

- Technology:Lithium-ion polymer (Li-Polymer).

- Configuration:Dual-cell 2S1P.

- Component type:Rechargeable internal battery.

- Compatible models:OnePlus 8T 5G, OnePlus 8T+ 5G and OnePlus 9R 5G.

- OnePlus 8T technical models:KB2000, KB2001, KB2003 and KB2005.

- OnePlus 8T+ 5G technical model:KB2007 (T-Mobile).

- OnePlus 9R technical models:LE2100 and LE2101.

- Quality:Service Pack.

 The BLP801 Service Pack battery stands out for its correspondence with the dual-cell configuration used in the OnePlus 8T and OnePlus 9R. Its typical equivalent capacity of 4500 mAh makes it suitable for repairs involving battery wear and progressive battery life reduction. Part number 1031100032 facilitates precise component identification and verification against the removed battery, particularly when working with devices from different markets. Its 7.74 V electrical configuration corresponds to the power system design of these models, maintaining the battery architecture intended for their charging functions. It is a suitable solution for repair workshops seeking precise repairs, documented compatibility and reliable selection of the replacement components used.

- Switch off the device completely before starting and use electrostatic discharge (ESD) protection.

- Reduce the installed battery charge below 25% before disassembly to minimise risks during handling.

- Disconnect the battery before removing it, avoiding punctures, deformation or damage to the cells.

- Check that the BLP801 reference and connector match those of the removed battery.

- Position the new component in its housing and carefully connect the flex cable without forcing the contacts.

- Remove any remaining old adhesive and use suitable fixing adhesive to secure the battery.

- Check device startup, battery recognition, charge percentage and charging system operation before closing the device.

- Perform a charging calibration cycle when necessary to stabilise the battery percentage reading.

- Replace the rear cover sealing adhesive and verify that it is correctly secured. Take the removed battery to an authorised recycling facility.