Battery BLP911 5000mAh by Realme 9 Pro RMX3471 9i RMX3491 V25 4200013 Service Pack

The BLP911 Service Pack battery, with part number 4200013, is designed for the Realme 9 Pro 5G RMX3471/RMX3472, Realme 9i 4G RMX3491/RMX3493 and Realme V25 5G RMX3475. This internal lithium-polymer replacement battery features a typical capacity of 5000 mAh, a minimum capacity of 4880 mAh and a nominal voltage of 3.87 V. It allows a battery experiencing reduced battery life, power supply failures or interruptions during use to be replaced. Its identification by model and part number facilitates component selection for professional repairs and maintenance operations.

- Brand:Realme.

- Battery reference:BLP911.

- Part number:4200013 / 4909637.

- Quality:Service Pack.

- Component type:Rechargeable internal battery.

- Technology:Lithium Polymer (Li-Polymer).

- Typical capacity:5000 mAh.

- Minimum capacity:4880 mAh.

- Nominal voltage:3.87 V.

- Charging voltage limit:4.45 V.

- Typical energy:19.35 Wh.

- Minimum energy:18.88 Wh.

- Realme 9 Pro 5G:RMX3471 and RMX3472.

- Realme 9i 4G:RMX3491 and RMX3493.

- Realme V25 5G:RMX3475.

The BLP911 Service Pack battery provides a replacement solution for compatible Realme family models, maintaining the electrical specifications corresponding to the replacement component. Its typical capacity of 5000 mAh and nominal voltage of 3.87 V allow a deteriorated unit to be replaced and the device's power supply to be restored using a component identified for this repair.

Part numbers 4200013 and 4909637 facilitate component identification and management in professional spare parts catalogues. Its lithium-polymer technology and internal format allow replacement while maintaining the intended battery arrangement. It is a suitable option for repair technicians carrying out repairs related to insufficient battery life, unexpected shutdowns or problems resulting from battery deterioration.

- Completely power off the device and use electrostatic discharge (ESD) protection during the repair.

- Disconnect the existing battery before working on the internal components of the device.

- Carefully remove the previous battery and clean any adhesive residue remaining in its housing.

- Position the new BLP911 battery in its corresponding location, using suitable adhesive for secure attachment.

- Align the power flex cable and connect it without forcing the contacts or applying excessive pressure to the connector.

- Check device startup, battery recognition and charging operation before final closure.

- Replace the back cover adhesive and check its correct attachment and sealing.

- After installation, perform a full charge and check how the battery percentage changes during normal operation.