Battery BLP953 1780 mAh by OPPO Find N2 5G PGU110 Premium quality

BLP953 1780mAh Battery for OPPO Find N2 5G PGU110 Premium Quality

Internal BLP953 battery for OPPO Find N2 5G PGU110 in Premium quality, designed to recover the autonomy and power stability of the foldable device. This replacement part corresponds to one of the two batteries forming the power system of the handset and has a typical capacity of 1780mAh, a nominal voltage of 3.89V and an energy rating of 6.92Wh. Its format, flex cable and connector are prepared to replace the BLP953 unit when it shows wear, swelling, rapid discharge or irregular operation.

Specifications

Internal rechargeable lithium-ion polymer battery.

Typical capacity of 1780mAh.

Approximate rated capacity of 1735mAh.

Nominal voltage of 3.89V.

Maximum charging voltage of 4.48V.

Typical energy of 6.92Wh.

BLP953 internal reference.

Compatible with OPPO Find N2 5G PGU110.

Component of the system formed by the BLP953 and BLP955 batteries.

Premium quality provides stable current delivery and uniform behaviour during charging and discharging cycles. It helps correct rapid percentage drops, unexpected shutdowns, restarts and loss of autonomy when the fault is caused by the BLP953 battery. Its construction is adapted to the internal space and electrical system of the OPPO Find N2, facilitating precise installation and a firm connection. It is also recommended to check the condition of the BLP955 battery to ensure that both units operate correctly and maintain balanced behaviour.

Available for immediate shipping from Spain.

Installation Advice

Turn off the device completely before starting the repair.

Disconnect the internal batteries before handling other components.

Use suitable tools and protection against electrostatic discharge.

Do not bend, puncture, press or apply direct heat to the battery.

Check the BLP953 reference, flex cable shape and connector position.

Do not confuse the BLP953 with the secondary BLP955 battery.

Check the condition of both batteries before closing the device.

Replace the fixing adhesives and prevent movement inside the chassis.

Perform a power-on, charging, consumption and temperature test before final closure.

Complete a charging cycle and check that the displayed percentage remains stable.

Notice

Before installation, always check the batteries fitted in the handset. The OPPO Find N2 5G PGU110 uses a system consisting of the BLP953 and BLP955 references, with different capacities and formats. The BLP953 corresponds to only one part of the assembly and must not be replaced by the BLP955.

Always compare the reference printed on the removed battery, the flex cable shape, the connector position, the voltage and the physical dimensions before installation. This battery does not correspond to the OPPO Find N2 Flip.

Technical Table