Battery BLP957 5000mAh by Realme 10 4G RMX3630 6060069 Service Pack

The BLP957 battery for Realme 10 4G RMX3630, with manufacturer part number 6060069 and Service Pack quality, is an internal replacement component designed to restore the phone's power supply when its battery shows signs of deterioration. It has a typical capacity of 5000 mAh, a minimum capacity of 4880 mAh and a nominal voltage of 3.87 V. Its lithium-ion technology and specific format allow the battery installed in this model to be replaced. It is a component intended for repair technicians who need to resolve reduced battery life, irregular charging or unexpected shutdowns associated with battery deterioration.

- Brand:Realme.

- Battery reference:BLP957.

- Part number:6060069.

- Quality:Service Pack.

- Component type:Rechargeable internal battery.

- Technology:Lithium-ion (Li-ion).

- Typical capacity:5000 mAh.

- Minimum capacity:4880 mAh.

- Nominal voltage:3.87 V.

- Typical energy:19.35 Wh.

- Adhesive:Includes battery mounting adhesive.

- Compatible model:Realme 10 4G.

- Technical model:RMX3630.

The BLP957 identification and part number 6060069 allow technicians to select the corresponding replacement for the Realme 10 4G RMX3630 and simplify spare parts management in the workshop. As a Service Pack component, it is intended to maintain the battery configuration specified for this device, with a typical capacity of 5000 mAh and a nominal voltage of 3.87 V.

Replacing this battery provides a specific solution for devices whose battery life has decreased due to battery ageing. The included mounting adhesive facilitates positioning the component inside its housing. Checking device startup, battery charge percentage and power supply stability after installation allows technicians to complete a controlled repair procedure aimed at restoring normal device operation.

- Completely power off the device and use electrostatic discharge (ESD) protection during the repair.

- Disconnect the existing battery before handling the internal components of the device.

- Carefully remove the previous battery and clean any adhesive residue from its housing.

- Position the new BLP957 battery using the corresponding mounting adhesive, maintaining its correct position and orientation.

- Align the connection flex cable and connect it without forcing the contacts or applying excessive pressure.

- Check device startup, battery recognition and charging operation before final closure.

- Replace the back cover adhesive and check its correct attachment and sealing.

- After installation, perform a full charge and check how the battery percentage changes during normal operation.