Battery BLP973 4500mAh by OPPO Reno9 Reno9 Pro PHM110 PGX110 premium quality

BLP973 Battery for OPPO Reno9 Reno9 Pro PHM110 PGX110 premium quality

BLP973 battery with 4500 mAh, 3.87 V and 17.41 Wh for OPPO Reno9 PHM110 and OPPO Reno9 Pro PGX110 in premium quality, designed to recover the autonomy, charging stability and power operation of the device. OPPO brand and technical models PHM110 and PGX110 visible for precise identification before installation. This spare part allows replacing degraded batteries, with unexpected shutdowns, low duration, swelling or unstable charging cycles. Includes BLP973 reference and verified compatibilities for OPPO Reno9 and OPPO Reno9 Pro. Designed for professional installation and charging test before closing the chassis.

Premium quality guarantees stable performance, correct fit and good response during charging and discharging cycles. Its 4500 mAh capacity allows recovering the terminal usage duration and maintaining adequate power delivery for professional repairs. It is a recommended solution to change OPPO Reno9 battery, change OPPO Reno9 Pro battery or replace BLP973 battery when the device shows reduced autonomy, restarts, shutdowns when power is required or irregular charging. It is recommended to check the reference printed on the removed battery, inspect the flex, verify the connector position and perform a first calibration after installation. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling the terminal.

Use ESD protection throughout the process.

Check the BLP973 reference on the removed battery.

Perform a charging test before closing the chassis.

Do not force the flex or connectors during assembly.

Replace adhesives and clean internal residues.

Perform an initial calibration with controlled charging and discharging.

Notice

Before installation, always check the battery installed in the terminal. Some OPPO models may have regional variants or different internal references depending on the sales area. Always compare the reference printed on the removed battery, the technical model of the device, the flex and the connector position before removing adhesives or closing the device.

Technical table