Battery BLP993 4700mAh by OPPO Reno10 Pro Plus 5G Reno11 Pro 5G premium quality

BLP993 4700mAh Battery for OPPO Reno10 Pro Plus 5G Reno11 Pro 5G Premium Quality

Internal BLP993 battery for OPPO Reno10 Pro Plus 5G CPH2521 and PHU110, and OPPO Reno11 Pro 5G PJJ110, in premium quality, designed to restore the autonomy and energy stability of the device. This replacement part allows a degraded or swollen battery with rapid discharge, abnormal percentage variations or unexpected shutdowns to be replaced. It uses an internal dual-cell architecture with a typical equivalent capacity of 4700mAh, a nominal voltage of 7.82V and approximate energy of 18.37Wh. Prepared for professional installation and complete testing before closing the device.

Specifications

Internal rechargeable lithium-polymer battery with BLP993 reference.

Internal dual-cell configuration.

Typical equivalent capacity of 4700mAh.

Rated equivalent capacity of 4560mAh.

Typical capacity per cell of 2350mAh.

Rated capacity per cell of 2280mAh.

Nominal voltage of 7.82V.

Approximate typical energy of 18.37Wh.

Compatible with CPH2521, PHU110 and PJJ110 technical models using the BLP993 reference.

Premium quality provides stable energy delivery and suitable performance during fast charging and intensive device use. It helps restore lost autonomy and reduce problems such as sudden discharges, restarts, shutdowns when using demanding applications or unstable percentage readings. Its dual-cell configuration is designed to work with the power supply and charging system of the device, maintaining a firm connection and precise fit inside the chassis. It is a solution intended for professional repairs requiring verified compatibility, suitable capacity and stable operation. Available for immediate shipping from Spain.

Installation Tips

Completely disconnect the device before beginning the repair.

Remove the damaged battery without bending, puncturing or applying excessive heat.

Check that the BLP993 reference, flex position and connector match the removed battery.

Do not install the battery if it shows deformation, flex damage or puncture marks.

Clean any adhesive residue and use new battery-specific adhesives.

Perform power-on, fast charging, temperature and consumption tests before closing the chassis.

After installation, perform a complete charging and calibration cycle to check the percentage reading.

Notice

Before installation, always check the battery fitted in the device. Some OPPO models may have regional variants or different internal references depending on the market. Compare the reference printed on the removed battery, the technical model of the device, the flex position and the connector type.

The BLP993 battery is confirmed for OPPO Reno10 Pro Plus 5G CPH2521 and PHU110, and for OPPO Reno11 Pro 5G PJJ110. It is not advisable to select this battery based only on the Reno11 Pro commercial name, as the international CPH2607 variant has a different specified capacity and may use another internal configuration.

Technical Table