Battery BLPA05 5000mAh by OPPO Reno10 5G A2 Pro 5G CPH2531 PJG110 premium quality

BLPA05 5000mAh Battery for OPPO Reno10 5G A2 Pro 5G CPH2531 PJG110 Premium Quality

Internal BLPA05 battery for OPPO Reno10 5G CPH2531 and OPPO A2 Pro 5G PJG110 in premium quality, designed to restore the autonomy and energy stability of the device. This replacement part allows degraded, swollen batteries with rapid discharge, irregular charging cycles or unexpected shutdowns to be replaced. It has a typical capacity of 5000mAh, a rated capacity of 4870mAh, a nominal voltage of 3.89V and typical energy of 19.45Wh. It includes part number 621035000030 and is prepared for professional installation and prior testing before closing the device.

Specifications

Internal rechargeable lithium-ion battery with BLPA05 reference.

Typical capacity of 5000mAh.

Rated capacity of 4870mAh.

Nominal voltage of 3.89V.

Typical energy of 19.45Wh.

Rated energy of 18.94Wh.

Internal single-cell configuration.

Compatible with CPH2531 and PJG110 technical models using the BLPA05 reference.

Premium quality provides stable energy delivery, regular charging cycles and a precise fit inside the device housing. It helps restore lost autonomy and reduce problems such as sudden discharges, abnormal percentage variations, restarts or shutdowns when using demanding applications. Its construction facilitates a firm connection to the mainboard and suitable operation with the fast-charging system of the device. It is intended for professional repairs requiring the correct capacity, verified compatibility and stability during charging and daily use. Available for immediate shipping from Spain.

Installation Tips

Completely disconnect the device before beginning the repair.

Remove the damaged battery without bending, puncturing or applying excessive heat.

Check that the BLPA05 reference, connector and flex position match the removed battery.

Do not install the battery if it shows deformation, flex damage or signs of puncture.

Clean any adhesive residue and use new battery-specific adhesives.

Perform power-on, fast-charging, temperature and consumption tests before closing the chassis.

After installation, perform a complete charging and calibration cycle to check percentage stability.

Notice

Before installation, always check the battery fitted in the device. Some OPPO models may have regional variants or different internal references depending on the market. Compare the reference printed on the removed battery, the CPH or PJG technical model of the device, the flex position and the connector type.

The BLPA05 battery is confirmed for OPPO Reno10 5G CPH2531 and OPPO A2 Pro 5G PJG110. Do not select the battery based only on the commercial name of the device, as other models in the Reno10 family may use different references, capacities or connectors.

Technical Table