Battery BLPA31 by OPPO Reno11 5G CPH2599 PJH110 4680 mAh premium quality

BLPA31 Battery for OPPO Reno11 5G CPH2599 PJH110 4680 mAh Premium Quality

BLPA31 battery for OPPO Reno11 5G, technical models CPH2599 and PJH110, in premium quality, designed to restore the autonomy and power stability of the device. This replacement part allows a degraded, swollen or significantly reduced-capacity battery to be replaced. Its internal format, flex cable and connector are intended for the verified Reno11 5G variants. Before permanent installation, it must be compared with the removed battery and a complete power-on and charging test must be performed.

The battery has a rated capacity of 4680 mAh, a voltage of 3.91 V and an energy rating of 18.30 Wh. Its rechargeable lithium-ion technology provides a stable power supply during calls, browsing, multimedia playback and regular application use. It is suitable for devices showing accelerated discharge, unexpected shutdowns, irregular charging or a noticeable reduction in operating time between charges.

Premium quality provides electrical stability, good performance during charging cycles and a precise fit inside the internal compartment. It is intended for workshops and professionals looking for a reliable replacement part to repair the OPPO Reno11 5G. Due to the existence of regional variants, the BLPA31 reference, technical model, flex cable shape, connector and contact position must always be checked before installation.

Available for immediate shipping from Spain.

Installation advice

Completely disconnect the device before starting the repair.

Use ESD protection and suitable tools to handle the internal components.

Remove the old battery without piercing, bending or applying excessive heat.

Compare the BLPA31 reference, flex cable and connector with the removed battery.

Perform a power-on and charging test before securing the battery and closing the device.

Check that the charge percentage increases normally and that no restarts occur.

Replace the internal adhesives and remove residue from the previous installation.

Complete several normal charging cycles to stabilise the capacity reading.

Notice

Before installation, always inspect the battery removed from the device. The OPPO Reno11 5G is sold in CPH2599 and PJH110 regional variants that may incorporate internal differences depending on the market or manufacturing batch. Compare the printed BLPA31 reference, technical model, voltage, flex cable shape, connector and contact position. Do not install the battery if any of these elements do not match.

Technical table