Battery BLPA79 by OPPO Reno12 F 4G Reno12 F 5G Reno12 FS 5G y F27 5G 5000 mAh premium quality

BLPA79 Battery for OPPO Reno12 F 4G Reno12 F 5G Reno12 FS 5G and F27 5G 5000 mAh Premium Quality

BLPA79 battery for OPPO Reno12 F 4G CPH2687, OPPO Reno12 F 5G CPH2637, OPPO Reno12 FS 5G CPH2637 and OPPO F27 5G CPH2637 in premium quality. This replacement part is designed to replace a deteriorated, depleted battery or one with a noticeable loss of autonomy, restoring stable power delivery and proper device operation. It has a typical capacity of 5000 mAh and an energy rating of 19.55 Wh. It must be professionally installed and always compared with the reference of the removed battery.

Specifications

Battery reference BLPA79.

Rated capacity of 4870 mAh.

Typical capacity of 5000 mAh.

Rated energy of 19.05 Wh.

Typical energy of 19.55 Wh.

Rechargeable lithium-ion polymer technology.

Part number 621035000150.

Compatible with OPPO Reno12 F 4G CPH2687.

Compatible with OPPO Reno12 F 5G CPH2637.

Compatible with OPPO Reno12 FS 5G CPH2637.

Compatible with OPPO F27 5G CPH2637.

Premium quality guarantees stable energy delivery, good performance during charging cycles and a suitable fit inside the device. It restores autonomy when the installed battery shows rapid discharge, sudden percentage variations, unexpected shutdowns, abnormal overheating or difficulties completing the charging process.

Its construction facilitates precise assembly, respecting the flex position, connector and electrical characteristics of the removed battery. The Reno12 F 5G, Reno12 FS 5G and F27 5G designations correspond to the same CPH2637 technical model in different markets or commercial configurations. Designed to reduce repeat repairs and optimise repair times. Available for immediate shipping from Spain.

Installation Advice

Switch off the device completely before starting the repair.

Disconnect the battery before handling other internal components.

Use suitable tools and electrostatic discharge protection.

Do not bend, puncture, compress or directly heat the battery.

Remove the old adhesives and carefully clean the housing.

Check that the BLPA79 reference, connector and flex position match the removed battery.

Perform a power-on, charging and stability test before closing the device.

After installation, complete a controlled charging cycle to stabilise the percentage reading.

Warning

Before installation, always check the battery fitted in the device. Some OPPO models may have regional variants or different internal references depending on the market region. Always compare the reference printed on the original battery, the technical model of the device, the flex position, the connector and the electrical specifications.

Confirmed compatibility applies to OPPO Reno12 F 4G CPH2687 and the OPPO Reno12 F 5G, Reno12 FS 5G and F27 5G variants identified as CPH2637. It must not be confused with OPPO A79 5G CPH2557 or with other versions that only share a 5000 mAh capacity.

Technical Table