Battery BLPB63 by OPPO A5 Pro 4G CPH2711 y A5 Pro 5G CPH2695 5800 mAh premium quality

BLPB63 Battery for OPPO A5 Pro 4G CPH2711 and A5 Pro 5G CPH2695 5800 mAh Premium Quality

BLPB63 battery for OPPO A5 Pro 4G CPH2711 and OPPO A5 Pro 5G CPH2695 in premium quality, designed to replace the internal battery when it shows reduced autonomy, rapid discharge, unexpected shutdowns or charging difficulties. This replacement part restores stable power delivery and the expected energy performance of the device. It has a capacity of 5800 mAh and a nominal voltage of 3.92 V. It is intended for professional installation and must always be compared with the reference printed on the removed battery.

Specifications

Battery reference BLPB63.

Capacity of 5800 mAh.

Nominal voltage of 3.92 V.

Rechargeable lithium-ion polymer technology.

Compatible with OPPO A5 Pro 4G CPH2711.

Compatible with OPPO A5 Pro 5G CPH2695.

Internal non-removable battery.

Prepared to work with the compatible fast-charging system of the device.

Premium quality provides stable energy delivery, good performance during charging cycles and a precise fit in the internal housing of the device. It is a suitable solution for repairing devices that show a considerable reduction in autonomy, sudden percentage variations, restarts or an inability to retain charge.

Its construction is designed to facilitate safe installation, respecting the flex position, connector and electrical characteristics of the removed battery. The BLPB63 reference can be used in the indicated 4G and 5G variants, but it must not be installed based solely on the OPPO A5 Pro commercial name. The technical model of the device must always be checked before installation.

Designed to reduce repeat repairs and optimise repair times. Available for immediate shipping from Spain.

Installation Advice

Switch off the device completely before starting the repair.

Disconnect the battery before handling other internal components.

Use electrostatic discharge protection and suitable tools.

Do not bend, puncture, compress or directly heat the battery.

Remove the old adhesives and carefully clean the housing.

Check that the BLPB63 reference, connector and flex position match the removed battery.

Perform a power-on and charging test before closing the device.

After installation, complete a controlled charging cycle to stabilise the percentage reading.

Warning

Before installation, always check the battery fitted in the device. Some OPPO models may have regional variants or different internal references depending on the market region. Always compare the reference printed on the original battery, the technical model of the device, the flex position, the connector and the electrical specifications.

Confirmed compatibility applies to the OPPO A5 Pro 4G CPH2711 and OPPO A5 Pro 5G CPH2695. It must not be confused with other devices named OPPO A5, A5x, A5m or with variants intended for different markets.

Technical Table